Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
stabalizer specification for MD110 ?
- Thread starter dnaserver
- Start date
Expect more or less 1 Ampere 50 Volts per magazine on a running system.
If batteries are connected, you're better to use in your formula the I max of the rectifier unit (normally written on the unit) : After a power failure, the power unit will deliver his max current to charge batteries.
Take into account an efficiency of +/- 80 % for rectifier unit.
VA=55V * 15 A (example) * .80 = +/- 650 VA max per lim
Hope this help
/rorni
If batteries are connected, you're better to use in your formula the I max of the rectifier unit (normally written on the unit) : After a power failure, the power unit will deliver his max current to charge batteries.
Take into account an efficiency of +/- 80 % for rectifier unit.
VA=55V * 15 A (example) * .80 = +/- 650 VA max per lim
Hope this help
/rorni
- Thread starter
- #3
- Status
