Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SSU Button questions (On M39xx phones) 1

Status
Not open for further replies.
Aug 29, 2006
829
US
Couple questions:
Is it possible to relable these SSU keys? I have a few users who need access to more than one SSC list - it'd be nice if their keys could say List 0, List 1, etc...(I mean short of writing on the phone with a Sharpie).

My set is a 3904 so I have extra buttons up top to make SSU keys but my users only have 3903's so can I use any of the 4 keys below the LCD for SSU keys? Or are they already reserved for other functions? (I know one of them is SSU list 0 key but I don't know if I can use any of the others the for my own purposes - I don't remember ever programming that key for list 0 so it was either there before I got here or it got copied from another set.)

In the past it has been _difficult_ to train folks to use the shift key but I am willing to put the second SSU keys up on key 2 (shift+) if that is the best (or only) place to put them.

But if I can put them on one of the 4 buttons below, what key numbers are they? Since they are soft keys and change with context I'm not sure what key number to program. (Secondarily, I never have found a map of all the M39xx set keys. Does one exist that shows what keys are which both with and without shift key for 3902,3903 and 3904?)

That's it for now I think.

thanks in advance and more thanks later.

:eek:)

Cool Hand Luke said:
"Dyin'? Boy, He can have this little life any time He wants to. Do Ya hear that? Are ya hearin' it? Come on. You're welcome to it, Ol' Timer. Let me know You're up there. Come on. Love me, hate me, kill me, anything. Just let me know it... I'm just standin' in the rain talkin' to myself."
 
The M3903 phones can only use the first 4 keys, 0 to 3 for programming purposes. Key 0 tends to be programmed as the DN key. However the other 3 keys (if spare!) can have e.g. SSU 1, SSU 2, SSU 3 etc.

The existing key 23 can still be left blank or used as another SSU / SCC / SCU etc.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
OK then - now I know what I gotta do. Thank you for the info!


Cool Hand Luke said:
"Dyin'? Boy, He can have this little life any time He wants to. Do Ya hear that? Are ya hearin' it? Come on. You're welcome to it, Ol' Timer. Let me know You're up there. Come on. Love me, hate me, kill me, anything. Just let me know it... I'm just standin' in the rain talkin' to myself."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top