SSL VPN - Change URL?

[Hondy]

Hi

I'm using the SSL VPN for remote access to an intranet but the images don't show. The URL has a long string after it and when you look at the source the browser tries to pull the image from the URL of the VPN.

The picture is actually located:

http://intranet.mydomain.com/images/ball.jpg

But when view the missing image placeholder the source shows the URL as:

https://sslvpn.mydomain.com/asdafhkjhkljhssdfsdf/images/ball.jpg

I think this is because the URL of the images are relative.

Is there any way I can make the images appear by using the true URL rather than the ssl URL? If I use the Cisco client then it works fine but it doesn't via the SSL VPN.

Thanks for any advice!

 

[Supergrrover]

Is this what you are talking about?

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808bd92b.shtml

I haven't actually changed anything as far as that.


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[Hondy]

Ah I see where you are coming from and the web page you show kind of illustrates the issue. My issue isn't the logo but if you see at the "gradient" field there is a /+CSCOU+/ path? This is what appears before my pictures when trying to view our intranet so I can't see the real URL.

Any ideas?