I can't get the VPN to work from the Win2K client running SSH to the D-Link. It fails in the diag mode in the first IKE. SSH says the DFL-300 is not replying. Other internet traffic works OK. I did get the windows IPSec client to work, but I had to enter the client IP address every time (not acceptable for the CFO...). Any Ideas ? SSH & D-Link support are useless !
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SSH IPSec client to DFL-300 D-Link
- Thread starter wb8wbn
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question