SSH from a 2800

[sirlollypop]

I am running a K9 code on a 2821 rotuer and need to SSH to the firewall attached, which I can't access directly from the PC I am working on.

What do i need to configure on the 2800 to act as the SSH source.

Cheers

 

[brianinms]

You don't have to configure anything. You merely type


ssh -l username x.x.x.x

 

[sirlollypop]

I have to say that is what I thought and has worked previously, it is just this FW is not responing.

thanks

 

[burtsbees]

Port scan it, see if 22 is open. Can you console into it?

The Burt

 

[lerdalt]

if you are trying to use ssh to connect to the 2800, have you created the crypto key?

Is the firewall blocking port 22?

 

[jeter]

1)You need to setup a domain name.
2)crypto key generate rsa "use default 512".
3)On your ports type "transport inout telnet ssh".

Maybe some changes but this is how we use ssh to a router.

ssh -l name ip is used or setup putty an run ssh


Go Army!
Tek-TIP Member 19,650