Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SSC Card replacement

Status
Not open for further replies.

RPMcMurphy

Vendor
Aug 15, 2007
211
US
I have looked all through the docs, even the Hardware Replacement guide, and cannot find the procedure. Where can I find it? Or what is the procedure?

 
remove dongle on old card, place on new card.
remove db on old card, place on new card.

intall new card and power up

note: this is to replace SSC card only, not the software db or reinstalling the software.
 
Back the system up to the daughterboard on the SSC card, power down the switch, put the existing daughterboard on the new SSC card, and power up the switch.
 
forgot:

remove fiber db on old card and install on new card...
same for IP db
 
Is the CPU faulty or do you have a corrupted daughterboard?.

In my experience, it's usually the Daughterboard that goes, unless your system has had a lightning strike!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

Useful Nortel forum at
If it's working, then leave it alone!.
 
Why do you want to change the SSC????




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top