SSA Buttons

[kenkds]

I have a Merlin Magix 3.0 Processor with 024TDL in SLT 1
A 024TDL in SLT 2 and 016T/R in SLT 3 and an 800 GS/LS-ID in SLT 4.
I'm trying to add a SSA button to a secretarial station. The secretarial station resides on the first 024TDL and the extension I want to add to her phone resides on the second 024TDL board. Each time I go to add it to her extension I get a programming error or any other extension from the second 024TDL I get the programming error. If I add an extension from any one that resides on the same board as the secretarial station it works just fine.

Any Ideas would be appreciated.

Thank you
Ken

 

[Pepperz]

If the second board extension is an operator position, there will be a problem. Is it?

Pepperz@newper.net

 

[kenkds]

No, this switch has just one operator assigned on 1/1. This is the first I've seen this.

 

[merlinman]

That makes no sense to me.

I would do a BOARD RENUMBER and see if that changes anything.

It probably won't. In which case I have no clue as to why it won't do this.

Oh, I'd also try swapping the 024's, and see if the trouble stays with the slot or the board.