Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SRPT4640 cs1000

Status
Not open for further replies.

Mooselite04

Technical User
May 25, 2012
16
CA
Backup rules are failing for remote location SCS schedule backups.

If you tried manually or schedule in LD 43 Bkr 2,3,4 or whatever rule for SCS backup and you get SRPT4640 failed error. It's because your remote location is either a CPDC or CPMG cores. Meaning it works with linux. You have your Signaling server and Call server on the same card.

Go in Linux Base Manager - Route Table
Add the IP of the Main Call Server with the ELAN gateway of the remote site NOT the ELAN gateway of the Main Call Server. Leave it with 255.255.255.255 even if it's not right from your sheets and save it.

That should fix your SCS schedule backups from failing. Sorry leaving it here for future reference.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top