SRPT316 Internal communications message transmission failed.

[dogg1]

Hi All,

I started getting this message last Monday, it happened once and then again today. It only happens during midnight routines. The error is coming from an MGXP. I can see that its registered. I telneted to the MGXP and did a joinsecdomain anyway and ran mids again and recieved the error again. I have also did a stat ucm sys refresh in LD 117 and the card says its registered. Does anybody know what this messge is????

Thanks

JW

 

[Firebird Scrambler]

You haven't said what the actual error message is?. All I have on MGXP is

CS1000E rls 6
New MGC or MGXpec added but DSP channels remain down/disabled

Solution:
Step 1: Define the Superloops and IP addresses in LD 97
Step 2: Connect the Ethernet of the MGC/MGXpec.
Step 3: USE the CLI command mgcsetup on the MGC/MGXpec cards to define the E-lan information.
Step 4: The MGC/MGCXpec will download the mgcdb.xml file from the Call Server, and a reboot of the card follows
Step 5: LD 117 stat IPMG shows the IPMG is registered on the CS1000e
Step 6: The VGWs are still disabled/down
Step 7: REGENERATE the fingerprint in UCM.
Step 8: LD 117 [REG UCM SYS]

All the items are now registered and connected, up and running.



Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.net

linkedin

 

[dogg1]

Oops, I forgot to add the actual error message. Here it is:

SRPT316 Internal communications message transmission failed.
% (Transport: AFS; Subject: accountDB_BannerUpdate; Action: PUBLISHER; IP: 192.16
% 8.202.57; Reason: 11; Details: )

Thanks

JW