SRPT118 code 1

[wdmeche]

I recently had an OP 61 suffer a lightning strike. I got the two effected superloops back up but now I am gettin a SRPT118 CM: Server connection lost, and a SRPT117 CM: Server connection established. right after if. I also get a SRPT110 CM: Primary client connection established message. These come one after another.

The auto attendant is working, as well as Call Pilot. I can't find any other system that is down. Does anyone know what these errors are?

Thanks.

 

[Firebird Scrambler]

I did a search and came up with this information below.

Initialise seen on a CPP4 Processor :

This INI was kicked off with an SRPT0118 error :
[454] 13/09/2007 10:07:59 SRPT0118 CM: Server connection lost.

The SRPT0118 suggests a problem with the HSP (High Speed Pipe) between the 2 CPP4 processors

From the NTP's
Nortel Communication Server 1000 Release 4.5 - System Redundancy
Document Number: 553-3001-307
There is a reference to SRPT0118 in the "System Redundancy NTP 553-3001-307"
In here it describes changing the default IP Address for the HSP as below :

=> set hsp_ip
Activating HSP Addresses. Please wait ...

System is Redundant. Rebooting Inactive side to activate new HSP IP
addresses ...

24/03/2005 01:03:31 SRPT0118 CM: Server connection lost.

SRPT118 CM: Server connection lost.

Side 0 HSP IP set to "192.168.100.10"

So on an active working switch an SRPT0118 could be seen as a problem associated with the HSP


All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.