Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
srg50 1.0 to srg50 2.0
- Thread starter teekow
- Start date
- Thread starter
- #3
- Thread starter
- #4
update..........
When this SRG50 was originally installed, we had a lot of problems with echo on rls 1.0. We got it tweaked so that when there was an echo, it was limited to <5 seconds. That was as good as Nortel would admit that it would get with IP phones using analog trunks.
After the upgrade to rls 2.0, the echo is back and now it is not limited to <5 seconds.
Does anyone have any good ideas regarding IP phones and analog trunks. I went through the "managing echo on the BCM50" doc with no change.
Any thoughts?
Rob
When this SRG50 was originally installed, we had a lot of problems with echo on rls 1.0. We got it tweaked so that when there was an echo, it was limited to <5 seconds. That was as good as Nortel would admit that it would get with IP phones using analog trunks.
After the upgrade to rls 2.0, the echo is back and now it is not limited to <5 seconds.
Does anyone have any good ideas regarding IP phones and analog trunks. I went through the "managing echo on the BCM50" doc with no change.
Any thoughts?
Rob
- Status
Similar threads
- Locked
- Question
