SRG200/400 1

[xtract]

Hi,

I need to convert my BCM 3.6 to SRG 400,is converting only needs the keycode for SRG or is there any thing i need to do on BCM 400?and also do i need to upgrade to release 4.0 to convert to SRG 400 release 1.5?

Thanks

 

[biv343]

Keycode is all thats needed. Keep in mind once you make it an SRG it stays an SRG - any other keycodes you have become unusable.

System has to be on release 4 to be considered SRG 1.5

 

[countrytime]

You only need the keycode. Remember that once you convert to a SRG, your digital phones are no longer available. Also, insure that you have IP set and VoIP trunk liscences installed.

 

[xtract]

Thanks guys,You mean after i upgraded to release 4.0 i need to put all the IP trunks and IP Sets Keycodes before put the SRG Key Code

 

[biv343]

There is only one keycode for SRG. It enables all IP trunks and IP sets in the system. Digital ports will only work with an ATA connected to them.