SRG Analog Station Dialing with CS1K 5.5

[sl1tech]

I am having an issue with analog stations on an SRG 1.5 with a CS1000E main office on Succession 5.5. I am unable to make long distance calls via the CS1K from SRG analog stations, but can make local calls via the CS1K from SRG analog stations with no difficulty.

The following is a PRI and virtual trunk D-channel message on a successful (local PSTN) call:

DCH 10 IMSG SETUP REF 00008181 CH 248 0 15 0 TOD 18:37:12
PROGRESS: CALL IS NOT END TO END ISDN
CALLING #:7573524823 NUM PLAN: E164/NATIONAL / NPA
CALLED #:3525990 NUM PLAN: E164/SUBSCRIBER (NXX)/LOCL

DCH 6 UIPE_OMSG CC_SETUP_REQ REF 00001B96 CH 203 21 TOD 18:37:12 CK 5427312C
PROGRESS: CALL IS NOT END TO END ISDN
PROGRESS: INTERWORKING WITH PRIVATE WORK
CALLING #:7573524823 NUM PLAN: E164 TON: NATL
CALLED #:3525990 NUM PLAN: E164 TON: LOCL

DCH 10 OMSG CALLPROC REF 00008181 CH 248 0 15 0 TOD 18:37:12

DCH 6 UIPE_IMSG CC_PROCEED_IND REF 00001B96 CH 203 21 TOD 18:37:12 CK 54273292

DCH 6 UIPE_IMSG CC_ALERT_IND REF 00001B96 CH 203 21 TOD 18:37:12 CK 542735AD
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

The following is a failed local distance call attempt:
DCH 10 IMSG SETUP REF 00008181 CH 248 0 15 0 TOD 18:39:50
PROGRESS: CALL IS NOT END TO END ISDN
CALLING #:7573524823 NUM PLAN: E164/NATIONAL / NPA
CALLED #:18047126774 NUM PLAN: E164/NATIONAL / NPA

DCH 10 OMSG REL COMP REF 00008181 CH 248 0 15 0 TOD 18:39:50
CAUSE :UNASSIGNED NUMBER
DIAG: 003

I have spent a significant amount of time on this and have the appropriate NPI/TON information sent from the SRG (local subscriber for 7 digit, national for 10 digit). I am using default routes in the NRS to send both call types.

Any assistance will be greatly appreciated.

Thanks,

Dave

 

[johnpoole]

i've seen this on a tdm tie where the tie was internal and the call was seeing the ncos of the trunk instead of the ncos of the station.. might try that. the d may see the ncos of digital but not the analogs

john poole
bellsouth business
columbia,sc