Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SQL*Plus Prompt History 2

Status
Not open for further replies.
dabowles

dabowles

MIS
Jun 26, 2001
64
0
0
US
Hello,

Can anyone tell me if it is possible with SQL*Plus or if there may be an alternate program like SQL*Plus that has the capability of storing prompts in history and retrieving them like linux and Windows allows by using the up/down arrow and/or F3? It would be much easier to reload the previous command and change one item rather than typing the entire query all over again.

Thanks,

David B.
 
Sort by date Sort by votes
If you launch sqlplus from dos you have this ability:

c:\ sqlplus username/password@instance

 
Upvote 0 Downvote
Yes, I know that much but once you actually are into SQL*Plus is there any way to cache the prompt history inside the CLI? For example

SQL> select * from test;

If I execute that command and want to change it to "select * from test2;" without having to retype the entire line is there any hotkey or a way to setup a hotkey to retype that line automatically so all I have to do is backspace and make any necessary changes? The closes thing I have came up with would be just copying the previous line and pasting it.

If anyone has any other suggestions, please let me know as I can't find any documentation anywhere regarding this.

Thanks again,

David B.
 
Upvote 0 Downvote
Type "edit" or "ed". This will invoke the editor to edit your last sql statement. The file it creates for this is called "afiedt.buf".

[sup]Beware of false knowledge; it is more dangerous than ignorance.[/sup][sup] ~George Bernard Shaw[/sup]
Consultant/Custom Forms & PL/SQL - Oracle 8i & 9i - Windows 2000
 
Upvote 0 Downvote
David B.,

In addition to Barbara's (BJ's) excellent suggestion, it is nice to be aware of a couple of other methods in SQL*Plus of editing your current SQL*Plus command (although it would be even nicer if Oracle brought SQL*Plus into even the 20th century by supporting command-history recall and editing with arrow keys [smile]):

Method 1) Using SQL*Plus's built-in character editing commands.
Given your earlier example where you wanted to append a "2" to the command:
"SQL> select * from test;"
You could enter either of the following SQL*Plus editing commands:
Code: 
SQL> [b]a 2[/b]
  1* select * from test2
("a", appends characters to the present buffer line)
or
Code: 
SQL> [b]c/test/test2[/b]
  1* select * from test2
("c" searches for the string following your delimiter [in this case, I used '/' as the delimiter, but you may use any special character as the delimiter] and once it locates the string, replaces it with the string following the second delimiter. You may use an optional third delimiter following the replacement string if you wish to include one or more blank spaces as part of the replacement string. Also, by typing "SQL> c/abc", this would remove the string "abc" from your current SQL buffer line.)

Method 2) Using SQL*Plus's little-known, clever, unique, "one-stroke" copy-and-paste capability. (This is rather tricky from a finger-dexterity perspective and takes some getting used to, but once you master the trick, it is very handy.):

From higher up on your screen where your original text appears, use your mouse to "sweep" the text you wish to copy and paste, BUT DO NOT RELEASE YOUR LEFT MOUSE BUTTON...while you still have the left mouse button depressed, now press and release your right mouse button. If you did it correctly, the text you swept now appears below at your SQL> prompt, having been copied and pasted. (BTW, the copied-and-pasted text neither disrupts, nor appears in, your clipboard.)

You can then add the numeral "2" to the end of your command.

This Method #2 is very useful for copying and editing SQL*Plus commands that are not SQL commands (example: "COLUMN...", "COMPUTE...", "BREAK ON...", et cetera) since non-SQL SQL*Plus commands do not enter the SQL buffer, so you cannot "edit" them either with "afiedt.buf" or using the SQL*Plus buffer-editing commands in Method #1, above.

Let us know if these methods work for you, as well.

[santa]Mufasa
(aka Dave of Sandy, Utah, USA @ 17:09 (26Mar04) UTC (aka "GMT" and "Zulu"), 10:09 (26Mar04) Mountain Time)
 
Upvote 0 Downvote
You may also give a glance at SQL*Worksheet. It's shipped with Oracle since version 8 at least. Though contrary to sql*plus it's pure GUI tool.

Regards, Dima
 
Upvote 0 Downvote
Actually, SQL*Plus *DOES* support command history recall using the arrow keys, HOWEVER it only works in Windoze (as far as I know).

If anyone knows of a way to get it working in Linux/Unix, I would be thrilled to know how it's done so that I may pass it on to others.

Jim Kotan
Omaha, Nebraska, USA
javaman.gif

 
Upvote 0 Downvote
Jim,

Although SQL*Plus (character mode only, not GUI mode) in Windows exhibits nulti-command-recall behaviour with the arrow keys, it is not really a programmed function of SQL*Plus, but is a "residual effect" of the operating system when invoking SQL*Plus in character mode. I know this all sounds rather "gobbledy-gooky", but the bottom line is that SQL*Plus does not truly have any code in it for multi-command recall. If your SQL*Plus exhibits the behaviour it is a fluke courtesy of the operating system.

Cheers,

[santa]Mufasa
(aka Dave of Sandy, Utah, USA @ 23:38 (29Jul04) UTC (aka "GMT" and "Zulu"), 16:38 (29Jul04) Mountain Time)
 
Upvote 0 Downvote
jkota,
If you use emacs start a shell, Meta-x shell, and launch SQLPlus.
Marty
 
Upvote 0 Downvote
This is an interesting script I found on the net:
Code: 
#!/bin/ksh
# ------------------------------------------------------------------------
# Filename:   sx
# Version:    3.2.02
# Purpose:    sqlplus replacement shell with added functionality
#             (scroll through command history, extra commands, etc.)
# Notes:      execute "$0 -?" for help
#
# Customize:  (find #CUSTOM on text)
#   You have to set the password you want to use.
#   A few lines before it, you can set the PROMPT_VAL you want to use,
#   'SQL > ' for example.
#   If you run on Oracle8, you must go to ddl feature and change 2 
#   lines  (one uncomment, one comment) for ddl statements to work.
#
# Known bugs
#   Sometimes when you exit from sx, a 'defunct' process will remain.
#
#   If you execute 'man ' unix comand from sx '!' doesn't works well, and the 
# terminal keeps on 'noecho' mode (see stty -1). If you execute man |pg, works
# fine. Workaround: export PAGER="pg"
#
#   Now, at connect time, you get:     Enter user-name: Connected.
# May be not the best way to do the connection, but prevents the user/passwd 
# from showing in ps -ef. I've tries with '/nologin' and other ways but nothing 
# works best.
#
# History:
#  15/02/99 add desc2, primary, and index commands 
#  15/04/99 correct some little bugs
#  15/06/99 add help, tindex and ddl statements
#   1/07/99 correct ddl statement (add constraints and unique index no works)
#   7/07/99 trap ctrl-c on first password input (stty -echo)
#   8/07/99 change disable constraint by drop/recreate constraint on ddl 
#           include drop table statement on ddl
#  15/07/99 change some feautures using (on english version) reserved words.
#           also correct ddl feature for version 7.3.2
#  19/07/99 change /dev/tty for exec `tty` command
#           also change conection to can't any people see usr/pwd with ps
#  21/07/99 correct a bug that ocurs if run the script like another user(su)
#  21/10/99 add the new feature 'db'
#  21/10/99 correct the script to implement the use of 'store'
#
# - Jorge Martin-Maldonado <jormarti@syseca.es>
#
#  Thanks to Jared dba_list (oracle@telelists.com) for all the help i received
#  from all the suscribers
#  Also thanks to Martin Kolar (martin.kolar@spt.cz) who helps me a lot to
#  find & correct bugs and to enhance this script
# ----------------------------------------------------------------------------

# Print Help on screen

if [ "_$1" = "_-h"  -o "_$1" = "_-?" ] ; then
  cat 1>&2 <<EOF
Use:$0 -h [commands], where [-h] or [-?] - displays this help screen
       [commands ...] - standard sqlplus command line options
 $0 executes standard sqlplus with some added functionality:
 - "help script" gives this help
 - Command history that works like ksh history
   (Commands are stored in a file and recycled every 1000 statements. This 
   history remains active between sessions and database instances.
 - You can configure this script to directly connect to a default user/instance
 - Execute HOME/.sqlrc (if exists) at the beginning of the session.
 - DROP and TRUNCATE command ask for confirmation (works only if you type it 
   in, or do a GET statement. Will not work for pl/scripts execution
 - "desc2 [table]" shows full table description with enhanced output
 - "primary [table]" shows description of the primary keys
 - "index [index_name]" describes the specified index
 - "tindex [table]" shows description of all indexes of table
 - "ddl [table]" extract to screen ddl of all object referred to the table
   include: drop all references constraints
         create cluster if the table use it
         create table with constraints, index, comments and triggers
         create all references constraints
 - "db " shows tablespace usage excluding system tablespace

EOF
  exit
fi

# save terminal configuration
SAVETERM="$(stty -g 2>/dev/null)"
export PAGER="pg" #workaround for execution of !man 
TTY=`tty`

# verify if can run Ok (you only can get your history as user who made login)
OWNER=`ls -lL ${TTY} |tr -s " " " " |cut -f 3 -d " "` #owner of ${TTY}
if [ ${OWNER} != `whoami` ]; then   # Who am i now?
  echo "You are on 'su `whoami`' exec. You can't access ${OWNER} history"
  TTY=/dev/tty
fi

# Variable definitions we need
REAL="sqlplus"
#CUSTOM
#PROMPT_VAL="&promp "
PROMPT_VAL="$ORACLE_SID>"

# If this is not a real terminal (stdin) change to the REAL tool and stop script
[[ -t 0 ]] || exec ${REAL} $@

# Uncomment and customize the next 2 lines if you want automatic connection
#CUSTOM
USER=" "
PASSWD=""

# if you don't put user/passwd for security (any people edit script?)
if [ -z "${USER}" ]
then
# ask for user/passwd, and validate it (max 3 times)
  trap "stty echo;exit" 2
  for i in 1 2 3 ; do
    unset username password
    echo "User : `stty echo`\c"
    read username
    echo "Password[@Tns] : `stty -echo`\c"
    read password
    echo ""
    stty echo
    USER="`echo ${username}|sed 's/ //g'`"
    PASSWD="`echo ${password}|sed 's/ //g'`"
    ${REAL} -s >/dev/null 2>&1 <<EOF
${USER}/${PASSWD}
whenever sqlerror exit 1
select USER from dual;
exit 0
EOF
    if [ "$?" != "0" ]
    then
      echo "Invalid user/passwd@TNS. \n"
      USER=""
      PASSWD=""
      if [ ${i} -eq 3 ]
      then
        unset username password
        echo "User error. Abort.\n"
        exit 1
      fi
    else
      break
    fi
  done
fi

unset username password
# set the name of the edit file
SQLTEMP="/tmp/afiedt.$LOGNAME.buf"

# set the name of the conf file
SQLCONF="/tmp/storeconf${LOGNAME}.sql"

# History size, with name and size of history file
set -o vi
HISTFILE=/tmp/.hist_sql${LOGNAME}
HISTSIZE=1000

# Determines the default editor (VISUAL, EDITOR, vi), exit if none is found
EDITOR=${VISUAL:-$EDITOR} 
EDITOR=${EDITOR:-"vi"} 
whence ${EDITOR} >/dev/null 2>&1 || {
  echo "ERROR: Cannot find a valid editor to use.\n"
 exit 1
}
 
# Exec the redirection of the shell
( 
# change the interrupts 1, 3 y 15 (hangup, quit y kill)
  trap "exit" 1 3 15
# Inhibit also interrupt 2
  trap "" 2
# connect on invisible mode (history, ps, etc) user/passwd
print "${USER}/${PASSWD}"
print "set sqlprompt ''"

# if the .sqlrc file exists, execution it
if [[ -f ${HOME}/.sqlrc ]]; then
  print "@${HOME}/.sqlrc"
fi

# Params execute once at start
if [ ! -z $* ]; then
    print "$*"
fi

# at begin exec, say to user how get the help
print "prompt 'TYPE help script FOR A HELP'"
print "set sqlprompt '${PROMPT_VAL}'"
# if the statement is not exit or quit, continue loop
  while [[ "$l" != quit && "$l" != exit && "$l" != QUIT && "$l" != EXIT ]];
  do
# Read from stdin, and keep on history (-s)
    read -s l <${TTY} >${TTY} 2>&1
# analyse the statement, and the tool we use,
    [[ -n "$l" ]] && [[ ${REAL} = "sqlplus" ]] && { 
      
      cmd=$(echo $l|tr [:lower:] [:upper:])
      case $cmd in
# invoke host editor
       ED|EDI|EDIT)
# number of params > 1
         if [ ! -z ${3} ];then
           echo "Invalid file name." >${TTY}
           echo "Can't exec ed(it) statement." >${TTY}
           print
           continue
         fi
         FILE=${2}
# if we want use buffer (no params), save it to a file, and edit it.
         if [[ -z ${2} ]];then
           print "save ${SQLTEMP} replace" 
           FILE=${SQLTEMP}
         fi
         eval ${EDITOR} ${FILE} < ${TTY} >${TTY} 2>&1
# write the file edited to the screen
         [[ ${FILE} = ${SQLTEMP} ]] && print "get ${FILE}"
         continue;;
# to connect
        CONN|CONNE|CONNEC|CONNECT)
# more than 1 parameter. continue, it got error
         if [ ! -z ${3} ];then
             echo "to many parameters" > ${TTY}
             continue
         fi
         export username=${2}
         if [[ -z ${2} ]];then
# no parameter
            echo "User : \c" > ${TTY}
            read username
         fi
# one parameter, has paswwd inside?
         export tns=`echo ${username} | cut -f2 -d'@'`
         if [ "${tns}x" = "${username}x" ];then
            export tns=""
         fi
         export username=`echo ${username} | cut -f1 -d'@'`
         export password=`echo ${username} | cut -f2 -d'/'`
         if [ "${password}x" = "${username}x" ];then
            export password=""
         fi
         export username=`echo ${username} | cut -f1 -d'/'`
# no passwd
         if [ "${password}x" = "x" ];then
            if [ "${tns}x" = "x" ];then
               echo "Passwrd[@Tns] : `stty -echo`\c" > ${TTY}
            else
               echo "Passwrd : `stty -echo`\c" > ${TTY}
            fi
            read password
            echo "" > ${TTY}
            stty echo
            export password
         fi
         if [ "${password}x" != "x" ];then
            export password=/${password}
         fi
         if [ "${tns}x" != "x" ];then
            export tns=@${tns}
         fi
         print "connect ${username}${password}${tns}"
# Exec the glogin to set changes on the new instance (variable sqlpromt, etc)
# Comment the next line if you don't want to do it
         print "@${ORACLE_HOME}/sqlplus/admin/glogin.sql"
         unset username
         unset password
         unset tns
         continue;;
        
# Confirm DROP statement
        DROP)
         export sino=j
         while [[ "${sino}x" != "Yx" && "${sino}x" != "Nx" ]];
         do 
            echo "Do you want drop $2 `echo $3|cut -f 1 -d ';'`? (Y/N) : \c" > ${TTY}
            read sino
            if [ "${sino}x" = "nx" ];then
               export sino=N
            fi
            if [ "${sino}x" = "yx" ];then
               export sino=Y
            fi
         done
         if [ "${sino}x" = "Yx" ];then
            print "$l"
         else
            print
         fi
         unset sino
         continue;;

# Confirm TRUNCATE statement
        TRUNCATE|TRUN|TRUNC|TRUNCT)
         export sino=j
         while [[ "${sino}x" != "Yx" && "${sino}x" != "Nx" ]];
         do 
            echo "Are you sure? (Y/N) : \c" > ${TTY}
            read sino
            if [ "${sino}x" = "nx" ];then
               export sino=N
            fi
            if [ "${sino}x" = "yx" ];then
               export sino=Y
            fi
         done
         if [ "${sino}x" = "Yx" ];then
            print "$l"
         else
            print
         fi
         unset sino
         continue;;

# Implement help script statement
       HELP)
         export param=${2}
				 print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set pagesize 1000"
         print "set verify off"
         print "set feed 10"
         print "set feedback off"
         print "set heading off"
         print "ttitle ' '"
         if [ "${param}x" = "scriptx" -o "${param}x" = "SCRIPTx" ];then
						print "prompt ' '"
            print "prompt 'Use: $0 -h [commands], where [-h] or [-?] - displays this help screen'"
            print "prompt '      [commands ...] - standard sqlplus command line options'"
            print "prompt ' $0 executes standard sqlplus with some added functionality:'"
            print "prompt ' -"help script" gives this help'"
            print "prompt ' -Command history that works like ksh history'"
            print "prompt '  (Commands are stored in a file and recycled every 1000 statements. This '"
            print "prompt '  history remains active between sessions and database instances.'"
            print "prompt ' -You can configure this script to directly connect to a default user/instance'"
            print "prompt ' -Execute HOME/.sqlrc (if exists) at the beginning of the session.'"
            print "prompt ' -DROP and TRUNCATE command ask for confirmation (works only if you type it '"
            print "prompt '  in, or do a GET statement. Will not work for pl/scripts execution'"
            print "prompt ' -"desc2 [table]" shows full table description with enhenced output.'"
            print "prompt ' -"primary [table]" shows description of the primary keys'"
            print "prompt ' -"index [index_name]" describes the specified index'"
            print "prompt ' -"tindex [table]" shows description of all indexes of table'"
            print "prompt ' -"ddl [table]" extract ddl of all object referred to the table'"
            print "prompt '   include: drop all references constraints'"
            print "prompt '            create cluster if the table use it'"
            print "prompt '            create table with constraints, index, comments and triggers'"
            print "prompt '            create all references constraints'"
            print "prompt ' -"db " shows tablespace usage excluding system tablespace'"
         else
            print "$l"
         fi
	 print "ttitle off"
	 print "@${SQLCONF}"
	 print "!rm -f ${SQLCONF}"
         continue;;

# Implement desc2 statement
        DESC2)
         export TABLA=${2}
				 print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set pagesize 1000"
         print "set verify off"
         print "set feed 10"
         print "set feedback off"
         print "column COL FORMAT a20"
         print "column COMMENTS FORMAT a59"
         print "column COMMENTS WORD_WRAPPED"
         print "COLUMN CONSTRAINT_REL FORMAT A45"
         print "break on CONSTRAINT nodup"
         print "prompt DESCRIPTION OF ${TABLA}"
         print "DESC ${TABLA}"
         print "ttitle 'CONSTRAINTS OF ${TABLA}'"
         print "SELECT A.CONSTRAINT_NAME || '(' || A.CONSTRAINT_TYPE || ')' CONSTRAINT,B.TABLE_NAME || '(' || A.R_CONSTRAINT_NAME || ')' CONSTRAINT_REL FROM ALL_CONSTRAINTS A, ALL_CONSTRAINTS B WHERE A.TABLE_NAME LIKE UPPER('${TABLA}') AND A.CONSTRAINT_NAME NOT LIKE 'SYS%' AND B.CONSTRAINT_NAME = A.R_CONSTRAINT_NAME ORDER BY A.CONSTRAINT_NAME, B.TABLE_NAME;"
         print "SELECT CONSTRAINT_NAME CONSTRAINT,COLUMN_NAME || '(' || SUBSTR(TO_CHAR(POSITION), 0, 2) || ')' COL FROM ALL_CONS_COLUMNS WHERE TABLE_NAME LIKE UPPER('${TABLA}') AND CONSTRAINT_NAME NOT LIKE 'SYS%' ORDER BY CONSTRAINT_NAME, POSITION;"
         print "ttitle 'INDEXES OF ${TABLA}'"
         print "break on INDEX nodup"
         print "SELECT A.INDEX_NAME INDX,A.COLUMN_NAME || '(' || SUBSTR(TO_CHAR(A.COLUMN_POSITION), 0, 2) || ')' COL, DECODE(UNIQUENESS, 'UNIQUE', 'YES', 'NO') UNQ FROM ALL_IND_COLUMNS A, ALL_INDEXES B WHERE A.TABLE_NAME LIKE UPPER('${TABLA}') AND A.TABLE_NAME = B.TABLE_NAME AND A.TABLE_OWNER = B.TABLE_OWNER AND A.INDEX_NAME = B.INDEX_NAME AND A.INDEX_OWNER = B.OWNER ORDER BY A.INDEX_NAME, A.COLUMN_POSITION;"
         print "ttitle 'COMMENTS OF ${TABLA}'"
         print "SELECT COLUMN_NAME COL,COMMENTS  FROM ALL_COL_COMMENTS WHERE TABLE_NAME LIKE UPPER('${TABLA}') ORDER BY COLUMN_NAME;"
	 print "ttitle off"
	 print "@${SQLCONF}"
	 print "!rm -f ${SQLCONF}"
         continue;;

# Implement primary statement
       PRIMARY|PRI|PRIM|PRIMA|PRIMAR)
         export TABLA=${2}
         print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set pagesize 1000"
         print "set verify off"
         print "set feed 10"
         print "set feedback off"
         print "break on PRIMARY nodup"
         print "COLUMN POSITION NOPRINT"
         print "ttitle 'Primary key of ${TABLA}'"
         print "SELECT b.constraint_name PRIMARY,b.column_name COL,b.position FROM ALL_CONSTRAINTS a,ALL_CONS_COLUMNS b WHERE b.TABLE_NAME=UPPER('${TABLA}') AND a.CONSTRAINT_TYPE = 'P' AND a.CONSTRAINT_NAME = b.CONSTRAINT_NAME AND a.TABLE_NAME = b.TABLE_NAME AND a.OWNER = b.OWNER ORDER BY PRIMARY,COL;"
	 print "ttitle off"
	 print "@${SQLCONF}"
	 print "!rm -f ${SQLCONF}"
         continue;;

# Implement tindex statement
       TINDEX|TINDE|TIND)
         export TABLA=${2}
	 print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set pagesize 1000"
         print "set verify off"
         print "set feed 10"
         print "set feedback off"
         print "column COL FORMAT a20"
         print "column COMMENTS FORMAT a59"
         print "column COMMENTS WORD_WRAPPED"
         print "COLUMN CONSTRAINT_REL FORMAT A45"
         print "ttitle 'INDEXES OF ${TABLA}'"
         print "break on INDEX_NAME nodup"
         print "SELECT A.INDEX_NAME,A.COLUMN_NAME || '(' || SUBSTR(TO_CHAR(A.COLUMN_POSITION), 0, 2) || ')' COL, DECODE(UNIQUENESS, 'UNIQUE', 'YES', 'NO') UNQ FROM ALL_IND_COLUMNS A, ALL_INDEXES B WHERE A.TABLE_NAME LIKE UPPER('${TABLA}') AND A.TABLE_NAME = B.TABLE_NAME AND A.TABLE_OWNER = B.TABLE_OWNER AND A.INDEX_NAME = B.INDEX_NAME AND A.INDEX_OWNER = B.OWNER ORDER BY A.INDEX_NAME, A.COLUMN_POSITION;"
	 print "ttitle off"
	 print "@${SQLCONF}"
	 print "!rm -f ${SQLCONF}"
         continue;;

# Implement  index statement
       INDEX|INDE|IND)
         export INDICE=${2}
	 print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set pagesize 1000"
         print "set verify off"
         print "set feed 10"
         print "set feedback off"
         print "break on INDEX nodup"
         print "COLUMN POSITION NOPRINT"
         print "ttitle 'INDICE ${INDICE}'"
         print "break on INDEX nodup"
         print "SELECT A.INDEX_NAME INDX,A.COLUMN_NAME || '(' || SUBSTR(TO_CHAR(A.COLUMN_POSITION), 0, 2) || ')' COL, DECODE(UNIQUENESS, 'UNIQUE', 'YES', 'NO') UNQ FROM ALL_IND_COLUMNS A, ALL_INDEXES B WHERE A.INDEX_NAME LIKE UPPER('${INDICE}') AND A.TABLE_NAME = B.TABLE_NAME AND A.TABLE_OWNER = B.TABLE_OWNER AND A.INDEX_NAME = B.INDEX_NAME AND A.INDEX_OWNER = B.OWNER ORDER BY A.INDEX_NAME, A.COLUMN_POSITION;"
	 print "ttitle off"
	 print "@${SQLCONF}"
	 print "!rm -f ${SQLCONF}"
         continue;;

# Implement ddl statement
       DDL)
         export TABLA=${2}
	 print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set echo off "
         print "set trims on"
         print "set sqln off"
         print "set verify off"
         print "set feedback off"
         print "set feed 10"
         print "set pause off"
         print "set serveroutput on"
         print "ttitle off"
         print "prompt 'Generating ddl for ${TABLA}. Please wait'"
# Declare cursors and variables to make ddl
         print "declare"
# Exists table?
         print "cursor val is"
         print "select owner, table_name from all_tables "
         print "where table_name = upper('${TABLA}'); "
         print "var val%ROWTYPE;"
# References constraints
         print "cursor pre (s_own VARCHAR2,s_tab VARCHAR2) is"
         print "select a.owner, a.constraint_name, a.table_name "
         print "from all_constraints a, all_constraints b"
         print "where a.r_constraint_name = b.constraint_name and"
         print "a.constraint_type = 'R' and"
         print "b.table_name = s_tab and "
         print "b.owner = s_own and"
         print "b.owner = a.r_owner;"
         print "prr pre%ROWTYPE;"
# Table data
         print "cursor ctc (s_own VARCHAR2,s_tab VARCHAR2) is"
         print "select upper(owner) capown,upper(table_name) captab,"
         print "pct_free,pct_used,decode(ini_trans,0,1) initrans,"
         print "decode(max_trans,0,1) maxtrans,tablespace_name,"
         print "cluster_name,initial_extent,next_extent,min_extents,"
         print "max_extents,freelists,freelist_groups,pct_increase"
         print "from sys.dba_tables"
         print "where owner = s_own and"
         print "table_name = s_tab"
         print "order by owner,table_name;"
         print "ctr ctc%ROWTYPE;"
# Cluster data
         print "cursor clu (s_own VARCHAR2,s_cluster VARCHAR2) is"
         print "select upper(owner) capown2, upper(cluster_name) capclu2,"
         print "tablespace_name,pct_free,pct_used,key_size,"
         print "decode(ini_trans,0,1) initrans,"
         print "decode(max_trans,0,1) maxtrans,initial_extent,next_extent,"
         print "min_extents,max_extents,pct_increase,freelists,"
         print "freelist_groups"
         print "from sys.dba_clusters"
         print "where owner = s_own and"
         print "cluster_name = s_cluster;"
         print "clr clu%ROWTYPE;"
# Cluster column data
         print "cursor ccu (s_own VARCHAR2,s_cluster VARCHAR2,"
         print "s_tabla varchar2) is"
         print "select upper(a.clu_column_name) clucolname,"
         print "upper(a.tab_column_name) tabcolname,"
         print "upper(data_type) datatype,data_length,data_precision,"
         print "data_scale,default_length"
         print "from sys.dba_clu_columns a, sys.dba_tab_columns b"
         print "where a.owner = s_own and"
         print "a.owner = b.owner and"
         print "a.cluster_name = s_cluster and"
         print "a.table_name = s_tabla and"
         print "a.table_name = b.table_name and"
         print "a.tab_column_name = b.column_name;"
         print "crc ccu%ROWTYPE;"
# Cluster index
         print "cursor iuc (s_own VARCHAR2,s_cluster varchar2) is"
         print "select upper(owner) own, upper(index_name) indexname,pct_free,"
         print "upper(table_name),ini_trans,max_trans,tablespace_name,"
         print "min_extents, max_extents,freelists"
         print "from  sys.dba_indexes"
         print "where owner = s_own and "
         print "table_name = s_cluster and"
         print "table_type = 'CLUSTER'"
         print "order by owner,index_name;"
         print "iur iuc%ROWTYPE;"
# Compress mode for storage sizes
         print "cursor csc (s_own VARCHAR2,s_tab VARCHAR2) is"
         print "select bytes from sys.dba_segments"
         print "where segment_name = s_tab and"
         print "owner = s_own and"
         print "segment_type = 'TABLE';"
         print "csr csc%ROWTYPE;"
# Table column data
         print "cursor ccc (c_own VARCHAR2,c_tab VARCHAR2) is"
         print "select upper(column_name) colname,upper(data_type) datatype,"
         print "data_length,data_precision,data_scale,"
         print "nullable,default_length,data_default,column_id"
         print "from sys.dba_tab_columns"
         print "where table_name = c_tab and"
         print "owner = c_own"
         print "order by column_id;"
         print "ccr ccc%ROWTYPE;"
# Constraints data (primary and unique types)
         print "cursor ptp (s_own VARCHAR2,c_tab VARCHAR2,c_type VARCHAR2) is"
         print "select upper(a.owner) owner, upper(a.constraint_name) conname,"
         print "b.tablespace_name,b.pct_free,decode(b.ini_trans,0,1) initrans,"
         print "decode(b.max_trans,0,1) maxtrans,b.initial_extent,"
         print "b.next_extent,b.min_extents,b.max_extents,"
         print "b.pct_increase,b.freelists,b.freelist_groups"
         print "from  sys.dba_constraints a, sys.dba_indexes b"
         print "where a.table_name = c_tab and"
         print "a.owner = s_own and"
         print "a.constraint_type = c_type and"
         print "a.owner = b.owner and"
         print "a.constraint_name = b.index_name and"
         print "a.table_name = b.table_name;"
         print "ptr ptp%ROWTYPE;"
# Constraints columns data
         print "cursor pcp (c_own VARCHAR2,c_cons VARCHAR2) is"
         print "select upper(column_name) colname, position"
         print "from  sys.dba_cons_columns"
         print "where owner= c_own and"
         print "constraint_name = c_cons"
         print "order by position;"
         print "pcr pcp%ROWTYPE;"
# Foreign key data
         print "cursor ftp (c_own VARCHAR2,c_tab VARCHAR2,c_type VARCHAR2) is"
         print "select upper(a.owner) owner, upper(a.constraint_name) conname,"
         print "upper(a.r_owner) rowner, upper(a.r_constraint_name) rconname,"
         print "upper(b.table_name) tabname"
         print "from  sys.dba_constraints a, sys.dba_constraints b"
         print "where a.table_name = c_tab and"
         print "a.constraint_type = c_type and"
         print "a.owner = c_own and"
         print "a.r_owner = b.owner and"
         print "a.r_constraint_name = b.constraint_name;"
         print "ftr ftp%ROWTYPE;"
# References foreign key data (other tables)
         print "cursor ftp2 (c_own VARCHAR2,c_tab VARCHAR2,c_con VARCHAR2,"
         print "c_type VARCHAR2) is"
         print "select upper(a.owner) owner, upper(a.constraint_name) conname,"
         print "upper(a.r_owner) rowner, upper(a.r_constraint_name) rconname,"
         print "upper(b.table_name) tabname"
         print "from  sys.dba_constraints a, sys.dba_constraints b"
         print "where a.table_name = c_tab and"
         print "a.constraint_type = c_type and"
         print "a.constraint_name = c_con and"
         print "a.owner = c_own and"
         print "a.r_owner = b.owner and"
         print "a.r_constraint_name = b.constraint_name;"
# Constraints check data ( withot not null ones )
         print "cursor chk (c_own VARCHAR2,c_tab VARCHAR2) is"
         print "select upper(oc.name) conname, c.condition"
         print "from  sys.con$ oc, sys.obj$ o, sys.cdef$ c,sys.user$ u"
         print "where oc.con# = c.con# and"
         print "o.owner# = u.user# and"
         print "u.name = c_own and"
         print "c.obj#  = o.obj# and"
#CUSTOM
#         print "c.type  = 1 and"
# for oracle 8, uncomment next line, and comment previous one
         print "c.type#  = 1 and"
         print "o.name  = c_tab;"
         print "crr chk%ROWTYPE;"
# Nonunique indexes data
         print "cursor icc (c_own VARCHAR2,c_tab VARCHAR2) is"
         print "select upper(owner) owner, upper(index_name) indname,"
         print "tablespace_name,pct_free,decode(ini_trans,0,1) initrans,"
         print "decode(max_trans,0,1) maxtrans,initial_extent,next_extent,"
         print "min_extents,max_extents,pct_increase,freelists,"
         print "freelist_groups"
         print "from  sys.dba_indexes a"
         print "where table_name = c_tab and"
         print "owner = c_own and "
         print "uniqueness = 'NONUNIQUE';"
         print "icr icc%ROWTYPE;"
# Unique indexes data (NO CONSTRAINTS)
         print "cursor icc2 (c_own VARCHAR2,c_tab VARCHAR2) is"
         print "select upper(owner) owner, upper(index_name) indname,"
         print "tablespace_name,pct_free,decode(ini_trans,0,1) initrans,"
         print "decode(max_trans,0,1) maxtrans,initial_extent,next_extent,"
         print "min_extents,max_extents,pct_increase,freelists,"
         print "freelist_groups from  sys.dba_indexes a"
         print "where table_name = c_tab and owner = c_own and"
         print "uniqueness = 'UNIQUE' and"
         print "not exists (select 1 from sys.dba_constraints b"
         print "where a.index_name = b.constraint_name and"
         print "a.table_name = b.table_name and a.owner = b.owner);"
# Index columns data
         print "cursor irc (c_ind VARCHAR2, c_own VARCHAR2) is"
         print "select upper(column_name) colname, column_position"
         print "from  sys.dba_ind_columns"
         print "where index_owner = c_own and"
         print "index_name = c_ind"
         print "order by column_position;"
         print "irr irc%ROWTYPE;"
# Table comments
         print "cursor cot (c_tab VARCHAR2,c_own varchar2) is"
         print "select upper(owner) owner, upper(table_name) tabname, comments"
         print "from  sys.dba_tab_comments"
         print "where table_name = c_tab and"
         print "owner = c_own and "
         print "comments is not null;"
         print "cor cot%ROWTYPE;"
# Columns comments
         print "cursor col (c_tab VARCHAR2, c_own VARCHAR2) is"
         print "select upper(owner) owner, upper(table_name) tabname,"
         print "upper(column_name) colname, comments"
         print "from  sys.dba_col_comments"
         print "where owner = c_own and"
         print "table_name = c_tab and"
         print "comments is not null;"
         print "cfr col%ROWTYPE;"
# Triggers data
         print "cursor tri (c_tab VARCHAR2, c_own VARCHAR2) is"
         print "select description, when_clause,owner,trigger_name"
         print "from sys.dba_triggers"
         print "where table_name = c_tab and"
         print "table_owner= c_own;"
         print "trr tri%ROWTYPE;"
# Variable definitions
         print "mytrigger VARCHAR2(30);"
         print "myowner VARCHAR2(30);"
         print "cur1 PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;"
         print "rc INTEGER;"
         print "long_piece VARCHAR2(2000);"
         print "piece_len INTEGER := 0;"
         print "long_len INTEGER := 0;"
         print "cont INTEGER := 0;"
         print "charac NUMBER;"
         print "lista varchar2(1500); "
         print "tabla varchar2(30):='Y';"
# Function definition. Purpose: Write a piece of a long on separate lines 
         print "function write_long(l_piece in varchar2,l_longi in NUMBER) "
         print "return NUMBER is"
         print "begin"
         print "cont := 1;"
         print "while ( l_longi > cont  - 1 ) loop "
         print "charac := ascii(substr(l_piece,cont,1));"
         print "if charac <> 10 then"
         print "dbms_output.put(chr(charac));"
         print "else"
         print "dbms_output.new_line;"
         print "end if;"
         print "cont := cont + 1;"
         print "end loop;"
         print "return 0;"
         print "end write_long;"
# Function definition. Purpose: transforms bytes to kilobytes/Megabytes
         print "function orac_1024(l_in in number) return varchar2 is"
         print "begin"
         print "if mod(l_in,(1024*1024)) = 0 then"
         print "return to_char(l_in / (1024*1024))||'M';"
         print "elsif mod(l_in,1024) = 0 then"
         print "return to_char(l_in / 1024)||'K';"
         print "else"
         print "return to_char(l_in);"
         print "end if;"
         print "end orac_1024;"
# Begin work
         print "begin"
         print "dbms_output.enable(1000000);"
         print "open val;"
         print "loop"
         print "fetch val into var;"
         print "exit when val%notfound;"
         print "tabla :='X';"
         print "open pre (var.owner,var.table_name);"
         print "loop"
         print "fetch pre into prr;"
         print "exit when pre%notfound;"
         print "dbms_output.put_line('ALTER TABLE '||prr.owner||'.'"
         print "||prr.table_name);"
         print "dbms_output.put_line('  DROP CONSTRAINT '||"
         print "prr.constraint_name||';'||chr(10));"
         print "end loop;"
         print "close pre;"
         print "open ctc (var.owner,var.table_name);"
         print "loop"
         print "fetch ctc into ctr;"
         print "exit when ctc%notfound;"
# Coment the 9 next lines if you want original storages sizes
         print "open csc (ctr.capown,ctr.captab);"
         print "fetch csc into csr;"
         print "if csc%found then"
         print "ctr.initial_extent := csr.bytes;"
         print "if ctr.next_extent > ctr.initial_extent then"
         print "ctr.next_extent := ctr.initial_extent;"
         print "end if;"
         print "end if;"
         print "close csc;"
# Coment the 9 previus lines if you want original storages sizes
         print "if ctr.cluster_name is not null then"
         print "open clu (var.owner,ctr.cluster_name);"
         print "loop"
         print "fetch clu into clr;"
         print "exit when clu%notfound;"
         print "dbms_output.put_line('CREATE CLUSTER '"
         print "||clr.capown2||'.'||clr.capclu2||' (');"
         print "open ccu(var.owner,clr.capclu2,ctr.captab);"
         print "loop"
         print "fetch ccu into crc;"
         print "exit when ccu%notfound;"
         print "if length(lista) > 0 then"
         print "dbms_output.put_line(', ');"
         print "lista := lista ||', ';"
         print "end if;"
         print "dbms_output.put(chr(34)||crc.clucolname"
         print "||chr(34)||' '||crc.datatype);"
         print "lista := lista||crc.tabcolname;"
         print "if crc.datatype = 'CHAR' or"
         print "crc.datatype = 'VARCHAR2' or"
         print "crc.datatype = 'RAW' then"
         print "dbms_output.put('('||crc.data_length||')');"
         print "end if;"
         print "if (crc.datatype= 'NUMBER' and nvl(crc.data_precision,0) != 0)"
         print "or crc.datatype = 'FLOAT' then"
         print "if nvl(crc.data_scale,0) = 0 then"
         print "dbms_output.put('('||crc.data_precision||')');"
         print "else"
         print "dbms_output.put('('||crc.data_precision"
         print "||','||crc.data_scale||')');"
         print "end if;"
         print "end if;"
         print "end loop;"
         print "dbms_output.put_line(')');"
         print "if clr.pct_free is not null then"
         print "dbms_output.put('SIZE '||"
         print "ltrim(rtrim(orac_1024(clr.key_size))));"
         print "end if;"
         print "dbms_output.put(' PCTFREE '||to_char(clr.pct_free));"
         print "dbms_output.put(' PCTUSED '||to_char(clr.pct_used));"
         print "if clr.initrans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(clr.initrans));"
         print "end if;"
         print "if clr.maxtrans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(clr.maxtrans));"
         print "end if;"
         print "dbms_output.put(' STORAGE (');"
         print "if clr.initial_extent is not null then"
         print "dbms_output.put(' INITIAL '||"
         print "rtrim(ltrim(orac_1024(clr.initial_extent))));"
         print "end if;"
         print "if clr.next_extent is not null then"
         print "dbms_output.put(' NEXT '||orac_1024(clr.next_extent));"
         print "end if;"
         print "dbms_output.put_line(' MINEXTENTS '||to_char(clr.min_extents));"
         print "dbms_output.put(' MAXEXTENTS '||to_char(clr.max_extents));"
         print "dbms_output.put(' PCTINCREASE '||to_char(clr.pct_increase));"
         print "dbms_output.put(' FREELISTS '||to_char(clr.freelists));"
         print "dbms_output.put(' FREELIST GROUPS '||"
         print "to_char(clr.freelist_groups));"
         print "dbms_output.put_line(') TABLESPACE '||"
         print "clr.tablespace_name||';');"
         print "dbms_output.put_line(chr(10));"
         print "open iuc (var.owner,clr.capclu2);"
         print "loop"
         print "fetch iuc into iur;"
         print "exit when iuc%notfound;"
         print "dbms_output.put('CREATE INDEX '||iur.own"
         print "||'.'||iur.indexname||' ON CLUSTER '"
         print "||clr.capclu2||' PCTFREE '||to_char(iur.pct_free));"
         print "if iur.ini_trans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(iur.ini_trans));"
         print "end if;"
         print "if iur.max_trans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(iur.max_trans));"
         print "end if;"
         print "dbms_output.put(' STORAGE(MINEXTENTS '||"
         print "to_char(iur.min_extents)||' MAXEXTENTS '||"
         print "to_char(iur.max_extents)||' FREELISTS '||"
         print "to_char(iur.freelists)||' ) TABLESPACE '||"
         print "iur.tablespace_name||';');"
         print "end loop;"
         print "close iuc;"
         print "dbms_output.put_line(chr(10));"
         print "end loop;"
         print "close clu;"
         print "end if;"
         print "dbms_output.put_line('--DROP TABLE '||ctr.capown||'.'||"
         print "ctr.captab||' CASCADE CONSTRAINTS;'||chr(10));"
         print "dbms_output.put_line('CREATE TABLE '||ctr.capown||'.'||"
         print "ctr.captab||' (');"
         print "open ccc(ctr.capown,ctr.captab);"
         print "loop"
         print "fetch ccc into ccr;"
         print "exit when ccc%notfound;"
         print "if ccr.column_id <> 1 then"
         print "dbms_output.put_line(', ');"
         print "end if;"
         print "dbms_output.put(rpad((chr(34)||ccr.colname||chr(34)),30));"
         print "dbms_output.put(' '||ccr.datatype);"
         print "if ccr.datatype = 'CHAR' or ccr.datatype = 'VARCHAR2' or"
         print "ccr.datatype = 'RAW' then"
         print "dbms_output.put('('||ccr.data_length||')');"
         print "end if;"
         print "if (ccr.datatype = 'NUMBER' and nvl(ccr.data_precision,0) != 0)"
         print "or ccr.datatype= 'FLOAT' then"
         print "if nvl(ccr.data_scale,0) = 0 then"
         print "dbms_output.put('('||ccr.data_precision||')');"
         print "else"
         print "dbms_output.put('('||ccr.data_precision||','||"
         print "ccr.data_scale||')');"
         print "end if;"
         print "end if;"
         print "if ccr.default_length != 0 then"
         print "dbms_output.put(' DEFAULT '||ccr.data_default);"
         print "end if;"
         print "if ccr.nullable = 'N' then"
         print "dbms_output.put(' NOT NULL');"
         print "end if;"
         print "end loop;"
         print "close ccc;"
         print "dbms_output.put_line(')');"
         print "if ctr.cluster_name is not null then"
         print "dbms_output.put_line(' CLUSTER '||ctr.cluster_name"
         print "||' ('||ltrim(rtrim(lista))||');');"
         print "else"
         print "dbms_output.put('PCTFREE '||to_char(ctr.pct_free));"
         print "dbms_output.put(' PCTUSED '||to_char(ctr.pct_used));"
         print "if ctr.initrans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(ctr.initrans));"
         print "end if;"
         print "if ctr.maxtrans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(ctr.maxtrans));"
         print "end if;"
         print "dbms_output.put(' TABLESPACE '||ctr.tablespace_name);"
         print "dbms_output.put(' STORAGE (INITIAL '||"
         print "rtrim(ltrim(orac_1024(ctr.initial_extent))));"
         print "dbms_output.put_line(' NEXT '||"
         print "rtrim(ltrim(orac_1024(ctr.next_extent))));"
         print "dbms_output.put('MINEXTENTS '||to_char(ctr.min_extents));"
         print "dbms_output.put(' MAXEXTENTS '||to_char(ctr.max_extents));"
         print "dbms_output.put(' PCTINCREASE '||to_char(ctr.pct_increase));"
         print "dbms_output.put(' FREELISTS '||to_char(ctr.freelists));"
         print "dbms_output.put(' FREELIST GROUPS '||"
         print "to_char(ctr.freelist_groups));"
         print "dbms_output.put_line(');');"
         print "end if;"
         print "open chk(var.owner,ctr.captab);"
         print "loop"
         print "fetch chk into crr;"
         print "exit when chk%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('ALTER TABLE '||ctr.capown"
         print "||'.'||ctr.captab||' ADD CONSTRAINT '||crr.conname);"
         print "dbms_output.put_line('CHECK ('||"
         print "ltrim(rtrim(crr.condition))||');');"
         print "end loop;"
         print "close chk;"
         print "open ptp(var.owner,ctr.captab,'P');"
         print "loop"
         print "fetch ptp into ptr;"
         print "exit when ptp%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('ALTER TABLE '||ctr.capown"
         print "||'.'||ctr.captab||' ADD CONSTRAINT '||ptr.conname);"
         print "dbms_output.put('PRIMARY KEY (');"
         print "open pcp(ptr.owner,ptr.conname);"
         print "loop"
         print "fetch pcp into pcr;"
         print "exit when pcp%notfound;"
         print "if pcr.position <> 1 then"
         print "dbms_output.put(', ');"
         print "end if;"
         print "dbms_output.put(chr(34)||pcr.colname||chr(34));"
         print "end loop;"
         print "close pcp;"
         print "dbms_output.put_line(')');"
         print "dbms_output.put('USING INDEX ');"
         print "dbms_output.put('PCTFREE '||to_char(ptr.pct_free));"
         print "if ptr.initrans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(ptr.initrans));"
         print "end if;"
         print "if ptr.maxtrans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(ptr.maxtrans));"
         print "end if;"
         print "dbms_output.put(' TABLESPACE '||ptr.tablespace_name);"
         print "dbms_output.put(' STORAGE (INITIAL '||"
         print "rtrim(ltrim(orac_1024(ptr.initial_extent))));"
         print "dbms_output.put_line(' NEXT '||"
         print "rtrim(ltrim(orac_1024(ptr.next_extent))));"
         print "dbms_output.put('MINEXTENTS '||to_char(ptr.min_extents));"
         print "dbms_output.put(' MAXEXTENTS '||to_char(ptr.max_extents));"
         print "dbms_output.put(' PCTINCREASE '||to_char(ptr.pct_increase));"
         print "dbms_output.put(' FREELISTS '||to_char(ptr.freelists));"
         print "dbms_output.put(' FREELIST GROUPS '||"
         print "to_char(ptr.freelist_groups));"
         print "dbms_output.put_line(');');"
         print "end loop;"
         print "close ptp;"
         print "open ptp(var.owner,ctr.captab,'U');"
         print "loop"
         print "fetch ptp into ptr;"
         print "exit when ptp%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('ALTER TABLE '||ctr.capown"
         print "||'.'||ctr.captab||' ADD CONSTRAINT '||ptr.conname);"
         print "dbms_output.put('UNIQUE (');"
         print "open pcp(ptr.owner,ptr.conname);"
         print "loop"
         print "fetch pcp into pcr;"
         print "exit when pcp%notfound;"
         print "if pcr.position <> 1 then"
         print "dbms_output.put(', ');"
         print "end if;"
         print "dbms_output.put(chr(34)||pcr.colname||chr(34));"
         print "end loop;"
         print "close pcp;"
         print "dbms_output.put_line(')');"
         print "dbms_output.put('USING INDEX ');"
         print "dbms_output.put('PCTFREE '||to_char(ptr.pct_free));"
         print "if ptr.initrans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(ptr.initrans));"
         print "end if;"
         print "if ptr.maxtrans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(ptr.maxtrans));"
         print "end if;"
         print "dbms_output.put(' TABLESPACE '||ptr.tablespace_name);"
         print "dbms_output.put(' STORAGE (INITIAL '||"
         print "rtrim(ltrim(orac_1024(ptr.initial_extent))));"
         print "dbms_output.put_line(' NEXT '||"
         print "rtrim(ltrim(orac_1024(ptr.next_extent))));"
         print "dbms_output.put('MINEXTENTS '||to_char(ptr.min_extents));"
         print "dbms_output.put(' MAXEXTENTS '||to_char(ptr.max_extents));"
         print "dbms_output.put(' PCTINCREASE '||to_char(ptr.pct_increase));"
         print "dbms_output.put(' FREELISTS '||to_char(ptr.freelists));"
         print "dbms_output.put(' FREELIST GROUPS '||"
         print "to_char(ptr.freelist_groups));"
         print "dbms_output.put_line(');');"
         print "end loop;"
         print "close ptp;"
         print "open ftp(var.owner,ctr.captab,'R');"
         print "loop"
         print "fetch ftp into ftr;"
         print "exit when ftp%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('ALTER TABLE '||ctr.capown||"
         print "'.'||ctr.captab||' ADD CONSTRAINT '||ftr.conname);"
         print "dbms_output.put('FOREIGN KEY (');"
         print "open pcp(ftr.owner,ftr.conname);"
         print "loop"
         print "fetch pcp into pcr;"
         print "exit when pcp%notfound;"
         print "if pcr.position <> 1 then"
         print "dbms_output.put(', ');"
         print "end if;"
         print "dbms_output.put(chr(34)||pcr.colname||chr(34));"
         print "end loop;"
         print "close pcp;"
         print "dbms_output.put_line(')');"
         print "open pcp(ftr.rowner,ftr.rconname);"
         print "loop"
         print "fetch pcp into pcr;"
         print "exit when pcp%notfound;"
         print "if pcr.position = 1 then"
         print "dbms_output.put('REFERENCES '||"
         print "ftr.rowner||'.'||ftr.tabname||' (');"
         print "else"
         print "dbms_output.put(' ,');"
         print "end if;"
         print "dbms_output.put(chr(34)||pcr.colname||chr(34));"
         print "end loop;"
         print "close pcp;"
         print "dbms_output.put_line(');');"
         print "end loop;"
         print "close ftp;"
         print "open icc(var.owner,ctr.captab);"
         print "loop"
         print "fetch icc into icr;"
         print "exit when icc%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('CREATE INDEX '||icr.owner||"
         print "'.'||icr.indname||' ON '||ctr.capown||'.'||ctr.captab);"
         print "dbms_output.put('(');"
         print "open irc(icr.indname,icr.owner);"
         print "loop"
         print "fetch irc into irr;"
         print "exit when irc%notfound;"
         print "if irr.column_position <> 1 then"
         print "dbms_output.put(', ');"
         print "end if;"
         print "dbms_output.put(chr(34)||irr.colname||chr(34));"
         print "end loop;"
         print "close irc;"
         print "dbms_output.put_line(')');"
         print "dbms_output.put('PCTFREE '||to_char(icr.pct_free));"
         print "if icr.initrans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(icr.initrans));"
         print "end if;"
         print "if icr.maxtrans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(icr.maxtrans));"
         print "end if;"
         print "dbms_output.put_line(' TABLESPACE '||icr.tablespace_name);"
         print "dbms_output.put('STORAGE (INITIAL '||"
         print "rtrim(ltrim(orac_1024(icr.initial_extent))));"
         print "dbms_output.put(' NEXT '||"
         print "rtrim(ltrim(orac_1024(icr.next_extent))));"
         print "dbms_output.put(' MINEXTENTS '||to_char(icr.min_extents));"
         print "dbms_output.put(' MAXEXTENTS '||to_char(icr.max_extents));"
         print "dbms_output.put_line(' PCTINCREASE '||"
         print "to_char(icr.pct_increase));"
         print "dbms_output.put('FREELISTS '||to_char(icr.freelists));"
         print "dbms_output.put(' FREELIST GROUPS '||"
         print "to_char(icr.freelist_groups));"
         print "dbms_output.put_line(');');"
         print "end loop;"
         print "close icc;"
         print "open icc2(var.owner,ctr.captab);"
         print "loop"
         print "fetch icc2 into icr;"
         print "exit when icc2%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('CREATE UNIQUE INDEX '||icr.owner||'.'||"
         print "icr.indname||' ON '||ctr.capown||'.'||ctr.captab);"
         print "dbms_output.put('(');"
         print "open irc(icr.indname,icr.owner);"
         print "loop"
         print "fetch irc into irr;"
         print "exit when irc%notfound;"
         print "if irr.column_position <> 1 then"
         print "dbms_output.put(', ');"
         print "end if;"
         print "dbms_output.put(chr(34)||irr.colname||chr(34));"
         print "end loop;"
         print "close irc;"
         print "dbms_output.put_line(')');"
         print "dbms_output.put('PCTFREE '||to_char(icr.pct_free));"
         print "if icr.initrans is not null then"
         print "dbms_output.put(' INITRANS '||to_char(icr.initrans));"
         print "end if;"
         print "if icr.maxtrans is not null then"
         print "dbms_output.put(' MAXTRANS '||to_char(icr.maxtrans));"
         print "end if;"
         print "dbms_output.put_line(' TABLESPACE '||icr.tablespace_name);"
         print "dbms_output.put('STORAGE (INITIAL '||"
         print "rtrim(ltrim(orac_1024(icr.initial_extent))));"
         print "dbms_output.put(' NEXT '||"
         print "rtrim(ltrim(orac_1024(icr.next_extent))));"
         print "dbms_output.put(' MINEXTENTS '||to_char(icr.min_extents));"
         print "dbms_output.put(' MAXEXTENTS '||to_char(icr.max_extents));"
         print "dbms_output.put_line(' PCTINCREASE '||"
         print "to_char(icr.pct_increase));"
         print "dbms_output.put('FREELISTS '||to_char(icr.freelists));"
         print "dbms_output.put(' FREELIST GROUPS '||"
         print "to_char(icr.freelist_groups));"
         print "dbms_output.put_line(');');"
         print "end loop;"
         print "close icc2;"
         print "open cot(ctr.captab,ctr.capown);"
         print "loop"
         print "fetch cot into cor;"
         print "exit when cot%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('COMMENT ON TABLE '||"
         print "cor.owner||'.'||cor.tabname||' IS '||chr(39)||"
         print "ltrim(rtrim(cor.comments))||chr(39)||';');"
         print "end loop;"
         print "close cot;"
         print "open col(ctr.captab,ctr.capown);"
         print "loop"
         print "fetch col into cfr;"
         print "exit when col%notfound;"
         print "dbms_output.put(chr(10));"
         print "dbms_output.put_line('COMMENT ON COLUMN '||"
         print "cfr.owner||'.'||cfr.tabname||'.'||cfr.colname);"
         print "dbms_output.put('   IS '||chr(39));"
         print "dbms_output.put_line(ltrim(rtrim(cfr.comments))||chr(39)||';');"
         print "end loop;"
         print "close col;"
         print "end loop;"
         print "close ctc;"
         print "open tri(var.table_name,var.owner);"
         print "dbms_sql.parse(cur1,"
         print "'select trigger_body from sys.dba_triggers'||"
         print "' where trigger_name = :mytrigger and'||"
         print "' owner = :myowner', dbms_sql.native);"
         print "loop"
         print "fetch tri into trr;"
         print "exit when tri%notfound;"
         print "dbms_output.put_line(chr(10));"
         print "dbms_output.put_line('CREATE OR REPLACE TRIGGER ');"
         print "dbms_output.put_line(ltrim(rtrim(trr.description)));"
         print "if trr.when_clause is not null then"
         print "dbms_output.put_line('WHEN ( ');"
         print "dbms_output.put_line(ltrim(rtrim(trr.when_clause)));"
         print "dbms_output.put_line(' )');"
         print "end if;"
         print "dbms_sql.define_column_long(cur1,1);"
         print "dbms_sql.bind_variable(cur1,'mytrigger',trr.trigger_name);"
         print "dbms_sql.bind_variable(cur1,'myowner',trr.owner);"
         print "rc := dbms_sql.execute_and_fetch(cur1,FALSE);"
         print "long_len := 0;"
         print "loop"
         print "dbms_sql.column_value_long(cur1,1,2000,long_len,"
         print "long_piece,piece_len);"
         print "exit when piece_len = 0;"
         print "rc := write_long (long_piece,piece_len);"
         print "long_len := long_len + piece_len;"
         print "end loop;"
         print "end loop;"
         print "dbms_sql.close_cursor(cur1);"
         print "close tri;"
         print "dbms_output.put_line(chr(10));"
         print "open pre (var.owner,var.table_name);"
         print "loop"
         print "fetch pre into prr;"
         print "exit when pre%notfound;"
         print "open ftp2(prr.owner,prr.table_name,prr.constraint_name,'R');"
         print "loop"
         print "fetch ftp2 into ftr;"
         print "exit when ftp2%notfound;"
         print "dbms_output.put_line('ALTER TABLE '||prr.owner||'.'||"
         print "prr.table_name||' ADD CONSTRAINT '||ftr.conname);"
         print "dbms_output.put('FOREIGN KEY (');"
         print "open pcp(ftr.owner,ftr.conname);"
         print "loop"
         print "fetch pcp into pcr;"
         print "exit when pcp%notfound;"
         print "if pcr.position <> 1 then"
         print "dbms_output.put(', ');"
         print "end if;"
         print "dbms_output.put(chr(34)||pcr.colname||chr(34));"
         print "end loop;"
         print "close pcp;"
         print "dbms_output.put_line(')');"
         print "open pcp(ftr.rowner,ftr.rconname);"
         print "loop"
         print "fetch pcp into pcr;"
         print "exit when pcp%notfound;"
         print "if pcr.position = 1 then"
         print "dbms_output.put('REFERENCES '||"
         print "ftr.rowner||'.'||ftr.tabname||' (');"
         print "else"
         print "dbms_output.put(' ,');"
         print "end if;"
         print "dbms_output.put(chr(34)||pcr.colname||chr(34));"
         print "end loop;"
         print "close pcp;"
         print "dbms_output.put_line(');'||chr(10));"
         print "end loop;"
         print "close ftp2;"
         print "end loop;"
         print "close pre;"
         print "end loop;"
         print "close val;"
         print "if tabla <> 'X' then"
         print "dbms_output.put_line(chr(10)||"
         print "'The table doesn''t exist');"
         print "end if;"
         print "end;"
         print "/"
				 print "ttitle off"
				 print "@${SQLCONF}"
				 print "!rm -f ${SQLCONF}"
         continue;;
    DB)
	 print "store set ${SQLCONF} CREATE"
         print "set sqlprompt ''"
         print "set echo off "
         print "set trims on"
         print "set sqln off"
         print "set verify off"
         print "set feedback off"
         print "set feed 10"
         print "set pause off"
         print "set serveroutput on"
         print "ttitle off"
         print "prompt 'Generating DB usage. Please wait'"
         print "declare"
	 print "v_total_blocks number;"
	 print "v_total_bytes number;"
	 print "v_unused_blocks number;"
	 print "v_unused_bytes number;"
	 print "v_file_id number;"
	 print "v_block_id number;"
	 print "v_last_block number;"
	 print "v_used number;"
	 print "v_owner varchar2(12);"
	 print "v_segment varchar2(80);"
	 print "v_type char(1);"
	 print "wtbs varchar2(30);"
	 print "tab_tot number;"
	 print "total_bytes number;"
	 print "unused_bytes number;"
	 print "used_bytes number;"
	 print "free_bytes number;"
	 print "t_tab_tot number := 0;"
	 print "t_total_bytes number := 0;"
	 print "t_unused_bytes number := 0;"
	 print "t_used_bytes number := 0;"
	 print "t_free_bytes number := 0;"
	 print "cursor tbs is"
	 print "select tablespace_name "
	 print "from sys.dba_tablespaces "
	 print "where tablespace_name != 'SYSTEM'; "
	 print "cursor object_c (w_tbs varchar2) is"
	 print "select owner, 'I', index_name"
	 print "from sys.dba_indexes "
	 print "where tablespace_name = w_tbs"
	 print "union"
	 print "select owner, 'T', table_name"
	 print "from sys.dba_tables "
	 print "where tablespace_name = w_tbs"
	 print "union"
	 print "select owner, 'C', cluster_name"
	 print "from sys.dba_clusters "
	 print "where tablespace_name = w_tbs;"
	 print "begin"
	 print "dbms_output.enable(32000);"
	 print "dbms_output.put_line( 'Tablespace	Total	Free	Alloc.	Used	Unused');"
	 print "dbms_output.put_line( '------------------------------------------------------');"
	 print "open tbs;"
	 print "total_bytes := 0;"
	 print "unused_bytes := 0;"
	 print "used_bytes := 0;"
	 print "free_bytes := 0;"
	 print "loop"
	 print "fetch tbs into wtbs;"
	 print "exit when tbs%NOTFOUND;"
	 print "open object_c(wtbs);"
	 print "loop"
	 print "fetch object_c into v_owner, v_type, v_segment;"
	 print "exit when object_c%NOTFOUND;"
	 print "IF v_type = 'I' then "
	 print "dbms_space.unused_space(v_owner, v_segment, 'INDEX', v_total_blocks, v_total_bytes, v_unused_blocks, v_unused_bytes, v_file_id, v_block_id, v_last_block);"
	 print "total_bytes := total_bytes + v_total_bytes;"
	 print "unused_bytes := unused_bytes + v_unused_bytes;"
	 print "v_used := v_total_bytes - v_unused_bytes;"
	 print "used_bytes := used_bytes + v_used;"
	 print "ELSIF v_type = 'T' THEN "
	 print "dbms_space.unused_space(v_owner, v_segment, 'TABLE', v_total_blocks, v_total_bytes, v_unused_blocks, v_unused_bytes, v_file_id, v_block_id, v_last_block);"
	 print "total_bytes := total_bytes + v_total_bytes;"
	 print "unused_bytes := unused_bytes + v_unused_bytes;"
	 print "v_used := v_total_bytes - v_unused_bytes;"
	 print "used_bytes := used_bytes + v_used;"
	 print "ELSIF v_type = 'C' THEN "
	 print "dbms_space.unused_space(v_owner, v_segment, 'CLUSTER', v_total_blocks, v_total_bytes, v_unused_blocks, v_unused_bytes, v_file_id, v_block_id, v_last_block);"
	 print "total_bytes := total_bytes + v_total_bytes;"
	 print "unused_bytes := unused_bytes + v_unused_bytes;"
	 print "v_used := v_total_bytes - v_unused_bytes;"
	 print "used_bytes := used_bytes + v_used;"
	 print "END IF;"
	 print "end loop;"
	 print "close object_c;"
	 print "select trunc(sum (bytes)/1024/1024,1) into tab_tot from"
	 print "sys.dba_data_files where "
	 print "tablespace_name = wtbs;"
	 print "total_bytes := trunc(total_bytes/1024/1024,1);"
	 print "used_bytes := trunc(used_bytes/1024/1024,1);"
	 print "unused_bytes := trunc(unused_bytes/1024/1024,1);"
	 print "free_bytes := tab_tot - total_bytes;"
	 print ""
	 print "t_tab_tot := t_tab_tot + tab_tot;"
	 print "t_total_bytes := t_total_bytes + total_bytes;"
	 print "t_used_bytes := t_used_bytes + used_bytes;"
	 print "t_unused_bytes := t_unused_bytes + unused_bytes;"
	 print "t_free_bytes := t_free_bytes + free_bytes;"
         print "dbms_output.put_line(rpad(wtbs,16)||rpad(tab_tot,8)||rpad(free_bytes,8)||rpad(total_bytes,8)||rpad(used_bytes,8)||rpad(unused_bytes,8));"
	 print "end loop; "
	 print "close tbs;"
	 print "dbms_output.put_line( '------------------------------------------------------');"
         print " dbms_output.put_line(rpad('Total',16)||rpad(t_tab_tot,8)||rpad(t_free_bytes,8)||rpad(t_total_bytes,8)||rpad(t_used_bytes,8)||rpad(t_unused_bytes,8));"
	 print "end;"
         print "/"
	 print "ttitle off"
	 print "@${SQLCONF}"
	 print "!rm -f ${SQLCONF}"
         continue;;
      esac
}

# If it's a shell statement, execute it (eval)
    if [[ -n "$l" && -z "${l##!*}" ]];then
     if [ ! -z ${l#!} ]; then
       eval ${l#!} <${TTY} >${TTY} 
     else
       eval $SHELL < ${TTY} > ${TTY} 
     fi
      print
    else
# Else, we put on stdout, for sqlplus execution
      print "$l"
    fi
  done 
) | ${REAL}

# At end, restore terminal configuration, and drop temporary file
stty ${SAVETERM} 2>/dev/null
trap - 1 2 3 15
/bin/rm -f ${SQLTEMP}
exit 0
# End of File


----------------------------------------------------------------------------
The person who says it can't be done should not interrupt the person doing it. -- Chinese proverb
 
Upvote 0 Downvote
HP-UX has a seldom used utility "ied" that will allow you to do vi shell style command line recall for (almost) any command line utility, ftp, sqlplus, etc.

ied sqlplus x/y

If you use vi style shell editing, (esc k, for the last command) you will be right at home.

This is a HP developed, there may be similar utilities available for other platforms
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Andrzejek
  • Locked
  • Question
Get part of a string with SQL 1
Replies
2
Views
164
Andrzejek
Andrzejek
Livia8
  • Locked
  • Question
SQL SELECT - where date is null or greater than 2
Replies
9
Views
1K
carp
carp
annie1975
  • Locked
  • Question
sql script in an cron job script failing
Replies
3
Views
91
carp
carp
Livia8
  • Locked
  • Question
SQL script to find number of characters allowed in &quot;Description&quot; column of &quot;AP_INVOIC 2
Replies
5
Views
114
Livia8
Livia8
rk68
  • Locked
  • Question
History log of all SQLs of a particular schema
Replies
2
Views
75
rk68
rk68

Part and Inventory Search

Sponsor

Back
Top