Splitting IPLU

[bb34nne]

Hi to all!

I wondered, is it possible to "split" IPLU board in way to use half of board for IP trunk(we have IP route with another MD110) and half of board to connect IP phones?

Thanks for all useful tips and answers!

bb34nne

 

[bb34nne]

If it helps,



System is: VERSION=CXP1010101/4/TSWSP02/R3A


DEVICE BOARD REVISION INFORMATION
DATE: 30NOV09 TIME: 14:07:19

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-0-30 IPLU ROF1375067/2 R1A
CAA 158 0040 R3A EXE APPL
CAA 158 0037 R1C EXE KERNEL
CAA 158 0038 R1E EXE ROOTFS
CAA 158 0053 R2A EXE MSP
CAA 158 0046 R1A EXE INITRD
RYS 102 770 R1A EXE BOOT
RYS 102 777 R2B EXE FPGA
PCB CODE 2 EXE HW CODE 0
Mon Jan 29 2007 EXE 13:30:10

END



bb34nne

 

[whosrdaddy]

no, nein, njet, ...

in TSE you have the concept of RTP resources, unfortunately not in MD110/TSW

/Daddy



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[bb34nne]

OK, thanks, danke, spasibo

bb34nne

 

[jmayoral]

Can be done on BC11/SP14??

 

[whosrdaddy]

and how would you do that?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[jmayoral]

I would like to know if can be done the split on BC11.

 

[whosrdaddy]

no, it only can be done on the Server versions of MX-ONE (TSE).

BC11 hasn't even have proper ip phone support.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!