Ok, i've reached the break glass in case of emergency point, I've tried to configure split-tunneling with the Cisco 3060 Concentrator to no avail following Cisco's own documentation, though a little dated, it should be pretty accurate When I follow their directions i connect to the VPN successfully but cannot access any network resources through the vpn, i.e. the servers I'm VPN'ing to reach. I can get to the internet fine, but not any of the servers on my corporate end. When I set the tunneling policy to "Tunnel Everything" I can access my work network like i'm right there, as a i should be able to, but cannot access the internet, my users need to be able to access the internet using their own ISP not the proxy server on our domain, so they can test connectivity and support issues for their customers from an external perspective, while still being able to tweak the servers via the VPN. Any help would be appreciated TIA!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Split-Tunnel VPN with Cisco 3060 Concentrator
- Thread starter drew1701d
- Start date
Similar threads
- Locked
- Solved
- Locked
- Question