Split sip trunks between client on same system

[snowman50]

Hi guys.

Ipo500v2
8.64 software.

I have a customer who will be migrating from Isdn lines to sip channels soon.
They will be getting 12 channels and porting about 20 ddi numbers as well as there 2 main numbers.

What they would like is to split the sip channels so as the main company use 8 channels and the other company use 4 channels for outgoing calls.
This is so as the main company does not hog all the channels for outgoing calls.

Usually when I install sip it's all channels for the one company.
No issue there.
I do install sip quiet a lot but haven't come across this yet

Question is can you split the calls like this.

And if so how do I do it.
Some pointers would be helpful.

 

[janni78]

You can set how many channels an URI has and create 2 URIs with different outgoing IDs, incoming could still hog em up though.

"Trying is the first step to failure..." - Homer

 

[snowman50]

Hi Janni78

Yes that what I thought as well, thanks for the confirmation.
hopefully they wont have to many incoming calls as its a site I am not familiar with.

Thankyou for the Advice.