Hi all,
I've been given the task of powering down 4 servers for a maintenance procedure to take place as the original engineer isn't available, they are as follows:
System Manager, Utility Server, CM Servers, AES.
My question is, would I be best to start with the ones furthest from the switch when powering them down?
Any advice at all would be greatly appreciated.
I've been given the task of powering down 4 servers for a maintenance procedure to take place as the original engineer isn't available, they are as follows:
System Manager, Utility Server, CM Servers, AES.
My question is, would I be best to start with the ones furthest from the switch when powering them down?
Any advice at all would be greatly appreciated.