Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
spare extn ports on 2000 ips
- Thread starter wizo
- Start date
OzzieGeorge
Programmer
There isn't a command for that. You have to look in the box or do a len listup and graphical config if remote then work it out.
Once you determine which ports are programmed as digital stations as instructed by Ozziegeorge, you can see if a station is connected by command EC1
for example:
COMMAND=EC1
EC1>201
201:10 00 01
201=station number
:10=digital station
00= phoneset not connected
01=status of station = idle
EC1>200
200:10 01 01
200= station number
:10 = digital station
01=phoneset connected
01= status of station = idle
for example:
COMMAND=EC1
EC1>201
201:10 00 01
201=station number
:10=digital station
00= phoneset not connected
01=status of station = idle
EC1>200
200:10 01 01
200= station number
:10 = digital station
01=phoneset connected
01= status of station = idle
- Status
Similar threads
- Question