Hi, I just got a request to create (7) individual arrays using the avail (14) disks in an EXP400. The disk config consists of (2)x73GB drives and (12)x146 GB drives. My question is can I create one spanned array consisting of all 14 drives or is there an issue with the fact that two of the drives are 73GB. Don't have much familiarity with spanned arrays and don't know how much more redundancy you will get out of using one. Any help would be appreciated. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Spanned Arrays on an EXP400
- Thread starter itsp1965
- Start date
