SPAN across 2 2950's

[acidkewpie]

Hi,

Can someone confirm either way whether it is possible or not to configure a single SPAN destination port on one 2950 to mirror one source port on itself and one source port on a second 2950 trunked together. I really wish to do this without requiring any other gear at all, but am dubious that this is actually possible. I'd love to be proved wrong...

Cheers

Chris

 

[gwildfire]

Yes its possible and this documents explains RSPAN better than me

http://www.cisco.com/en/US/products...on_guide_chapter09186a00801cde7c.html#1081130

Visit

http://www.Cisco-Engineer.com

for free Cisco rack access.

CCNA, CCDA, CCNP, CCDP, CCIE R&S (Written), Net+, MCP, NCTS