sonicwall statistics problem

[sebd44]

[highlight #C4A000]Hello, i have two sonicwall with two different LAN
from sonicwall A and B are connected via a dedicated link, we have a static route in both firewall
so there is no problem with ping or RDP from the lan to the servers LAN A -----> LAN B

but the problem is when i try to reach from a server to the lan, i cannot reach anything
and the servers are in the LAN zone

+-------++-------+ +-------++-------+
- Sonicwall A - --dedicated link-----> - Sonicwall B -
+-------++-------+ +-------++-------+

LAN A : LAN ZONE this dedicated link from sonicwall A is a vlan
and from sonicwall B is a LAN zone
in both devices are firewall rules allowing traffic between zones but this are the statistics from the sonicwall B

LAN A TO LAN B

#
in the other hand the rule in reverse flow it have Rx statistic flowing well, those

14 LAN > LAN 14 Change priority... 130.0.10.0 X0 Subnet Any Allow All None Enabled Enabled

Access Rule #14 - Traffic Statistics

Rx Bytes: 1000285

Rx Packets: 3744

Tx Bytes: 298962

Tx Packets: 3377

Usage: 451

LAN B TO LAN A

#
LAN > LAN 13 Change priority... X0 Subnet 130.0.10.0 Any Allow All

and this is the statistics, but it didn't work, the Rx bytes are still in 0

Access Rule #13 - Traffic Statistics

Rx Bytes: 0

Rx Packets: 0

Tx Bytes: 41760

Tx Packets: 696

Usage: 2

anyone could give a hand with this, because i know hoiw to make a static route in a cisco device

ip route x.x.x.x 255.255.255.0 ip next hop / outgoing interface / AD

but in this case i have this problem with this device...please help