somebody has the BCM50 running on SIP trunks 1

[parkgroup]

thread1361-1614498 is reference to former thread where user was geting access to SIP trunk on the digital (T7316) set. That's all I want to do right now.

 

[GordonKapesMZ4]

Is the only problem that you aren't able to get the SIP trunks on your Lines on the BCM or is the problem that you can't register the SIP trunks? Upgrading to 6.0 would solve all your problems....if that's not feasible....let me know your setup and I'll do my best to help.

 

[parkgroup]

Why would upgrade to 6.0 solve all problems. I read here on closed threads, people have it running on 3.0...which I thought impossible.

voip line can not be assigned to the phone directly. so it has to in the pool and use the destination code(ex, press 9 to get an another dial tone).

and destination code has to linked to right route.(we had it on 000 which is PoolA - first issue)

DN type has to be Public(multiple digit dialplan, private only allows 3 digit.) - real issue, I can dial out now but it says "the number is not assigned". something to do with dialplan.

 

[parkgroup]

Working now was a SIP Trunk setting at the source.

Now calling out, and in. Problem now is...we can only answer on 221. Would like to have it appear on others phones who can see it ringing, and answer it like a A&P or Aonly loop.

Our loops are not working either. Had them working fine....then changed routers and they stopped