Some Data of Option 61C with A Law configuration 1

[mabsar]

Hi,

I need the following data of Meridian Option 61C, Rls 25, configured with A-LAW option. I have all the system of MU law and have to change one of Option 61C from MU law to A due to customer requirment. I have laready changed the PCML to A and INTN to YES, but still need the follwoing data just for referance and correction:

(#1)
LD 56
REQ PRT
TYPE FTC
TABLE

REQ PRT
TYPE MCAD
WCAD

REQ PRT
TYPE FCAD
WCAD

(#2)
LD 97
REQ PRT
TYPE SYSP

REQ PRT
TYPE SYSM

REQ PRT
TYPE XCTP

REQ PRT
TYPE DTR

I will appriciate if any one can either post it here .

Thanks in advance for support and help.

 

[janchundia]

>LD 15
FTR_DATA
.
.
.
TTBL 1
.
.

>ld 16
REQ CHG
TYPE RDB
ROUTE XX
.
.
.
.
.
TTBL 1
.
.
.
.


>LD 17
PARM
.
.
.
PCML A
.
.
.

ATRN
CODE 2
.
.
.
.

>LD 56
REQ PRT
TYPE FTC

TABL 1
NCAD 001
NBCS
XTON 002
DCAD 002
DBCS
XTON 002
ICAD 005
IBCS
XTON 002
RCAD 001
RBCS
XTON 002
GCAD 001
GBCS
XTON 002
HCAD 003
HBCS
XTON 002
PCAD 001
PBCS
XTON 000
XCAD 000
NDR1 PBX 002
NDR1 BCS
XTON 002
XCAD 002
NDR2 PBX 002
NDR2 BCS
XTON 002
XCAD 002
NDR3 PBX 002
NDR3 BCS
XTON 002
XCAD 002
NDR4 PBX 002
NDR4 BCS
XTON 002
XCAD 002
DIAL
XTON 105
XCAD 000
SPCL
XTON 105
XCAD 000
CDT
XTON 105
XCAD 000
CFDT
XTON 105
XCAD 016
MWDT
XTON 105
XCAD 017
CFMW
XTON 105
XCAD 018
BUSY
XTON 106
XCAD 016
RGBK
XTON 106
XCAD 031
ARBK
XTON 132
XCAD 002
FFCT
XTON 105
XCAD 000
ACTN
XTON 105
XCAD 000
HOWL 0027
LIMT
XTON 164
XCAD 002
NRMT
XTON 164
XCAD 018
AWUT
XTON 007
XCAD 017
OVFL
XTON 106
XCAD 017
TEST
XTON 134
XCAD 000
ERWT
XTON 108
XCAD 000
ACFT
XTON 108
XCAD 000
TLP
XTON 106
XCAD 000
TLPT 0
PATI
XTON 000
XCAD 000
EEST
XTON 108
XCAD 000
CAMP
XTON 108
XCAD 000
CDNC 017
ACBT
XTON 003
XCAD 000
CDNC 019
AOBT
XTON 108
XCAD 000
CDNC 018
CAB
XTON 121
XCAD 019
CDNC 019
INTU
XTON 108
XCAD 000
CDNC 019
CWT
XTON 108
XCAD 000
CDNC 020
OBKT
XTON 108
XCAD 000
CDNC 017
OVRD
XTON 108
XCAD 000
CDNC 018
OHQ
XTON 108
XCAD 000
CDNC 003
TMAT
XTON 108
XCAD 000
CDNC 022
TMOT
XTON 108
XCAD 000
CDNC 023
TSUT
XTON 108
XCAD 000
CDNC 023
SRC1
XTON 000
XCAD 000
SRC2
XTON 000
XCAD 000
SRC3
XTON 106
XCAD 000
SRC4
XTON 000
XCAD 000
SRC5
XTON 000
XCAD 000
SRC6
XTON 000
XCAD 000
SRC7
XTON 000
XCAD 000
SRC8
XTON 000
XCAD 000
CFSN
XTON 105
XCAD 000
CPOQ
XTON 003
XCAD 000
RGAR
XTON 105
XCAD 000
RPCT
XTON 105
XCAD 000
RGAB
XTON 106
XCAD 000
MWAN
XTON 105
XCAD 000
DNDA
XTON 105
XCAD 000
SSLK
XTON 105
XCAD 000
P10 8
ID1 768
ID2 512
IDD 512
IDE 384
RVDL 0


>LD 97
REQ PRT
TYPE SYSP

INTN = YES
.
.
.

REQ PRT
TYPE XCTP

DTMF 113
.
.
.


Reboot the system for the changes took effect

Javier

 

[mabsar]

Great.
Do I need anything else to change?

 

[mabsar]

Javier,

Thanks for the help, it worked. Will you please also post the MCAD & FCAD so that I can also match them with mine.

Thanks once again.

 

[Avaya911PLM]

I'd be very interested to know the following:

Did you have Meridian Mail before the change?
If so, did the A-Law/Mu-Law change affect the recordings that were on the system after the change?

--
Fletch

http://PBXTech.Net

 

[mabsar]

Fletch,
I know there would be a big problem if I had Meridian Mail, CallPilot,MICB or MIRAN working on Mu Law. My work would certainly be increased by these applications. But it was already in my planning and I took the note for every application which could be effected by the change.Fortunately I did not have with this customer but I do have with another one which I still have to do.

Absar

 

[janchundia]

You can use the same MCAD and FCAD Tables.
Change aren't necessary.


Javier