I have been tasked with doing some terminations for some single mode fiber that a customer is using. I am going to use the AFL Fast Connect LC connectors. We use them all the time with MM OM3/OM4 stuff, but this is my first dabble into single mode, and probably my last, so I don't want to invest $700 in a CT-08 cleaver or higher. Can I use a used CT-06 or CT-07 or even a CT-30A cleaver? I can get them on ebay for about 1/3 to 1/2 the cost of buying a new CT-08.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
some advice on Single Mode fiber cleavers?
- Thread starter Z-man
- Start date
A real* CT-30 will cleave as well as a CT-08 (*there are a lot of copies/fakes on the market).
AFL show a CT-30 being used on the Fast Connect instruction video here
AFL show a CT-30 being used on the Fast Connect instruction video here
- Status
Similar threads
- Locked
- Question
