Solaris Terminal Settings 1

[collinja]

I am trying to connect a dumb terminal to an E-3500 server, But I am getting no response when I power up the system.  Can anyone give me any troubleshooting tips????

 

[bigscouse]

It would be a good idea to state what you have already tried as there are numerous potential problems.<br>I assume you have checked the terminal settings and proven that the connection is working? <p>Ged Jones<br><a href=mailto:gedejones@hotmail.com>gedejones@hotmail.com</a><br><a href= > </a><br>

 

[trixxyp]

it would be an idea to tell us what you are using as a dumb term??? psion vt100 etc <br><br>and also have you proofed the cable between e35k and dumb term a ok..??? ie have you been able to try dumb term on another sun box??<br><br>

 

[trixxyp]

#<font color=red> sacadm -l </font><br>PMTAG&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;PMTYPE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;FLGS RCNT STATUS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;COMMAND<br>zsmon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ttymon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-&nbsp;&nbsp;&nbsp;&nbsp;0&nbsp;&nbsp;&nbsp;&nbsp;ENABLED&nbsp;&nbsp;&nbsp;&nbsp;/usr/lib/saf/ttymon # <br># <font color=red>pmadm -l</font><br>PMTAG&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;PMTYPE&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;SVCTAG&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;FLGS ID&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&lt;PMSPECIFIC&gt;<br>zsmon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ttymon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ttya&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;u&nbsp;&nbsp;&nbsp;&nbsp;root&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;/dev/term/a I - /usr/bin/login - 9600 ldterm,ttcompat ttya login:&nbsp;&nbsp;- tvi925 y&nbsp;&nbsp;# <br>zsmon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ttymon&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ttyb&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;u&nbsp;&nbsp;&nbsp;&nbsp;root&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;/dev/term/b I - /usr/bin/login - 9600 ldterm,ttcompat ttyb login:&nbsp;&nbsp;- tvi925 y&nbsp;&nbsp;# <br><br>these cmmds should be done as root. this will tell you if the port has been enabled and that the service is running