Solaris 10 link_mode

[frankli]

Hi folks,

I m wondering how I can tell the link_mode on a Solaris 10 server, seems link_mode, link_speed, link_status are not supported in Solaris 10. Thanks.

/usr/sbin/ndd -get /dev/ce \?
? (read only)
instance (read and write)
adv_autoneg_cap (read and write)
adv_1000fdx_cap (read and write)
adv_1000hdx_cap (read and write)
adv_100T4_cap (read and write)
adv_100fdx_cap (read and write)
adv_100hdx_cap (read and write)
adv_10fdx_cap (read and write)
adv_10hdx_cap (read and write)
adv_asmpause_cap (read and write)
adv_pause_cap (read and write)
master_cfg_enable (read and write)
master_cfg_value (read and write)
use_int_xcvr (read and write)
enable_ipg0 (read and write)
ipg0 (read and write)
ipg1 (read and write)
ipg2 (read and write)
rx_intr_pkts (read and write)
rx_intr_time (read and write)
red_dv4to6k (read and write)
red_dv6to8k (read and write)
red_dv8to10k (read and write)
red_dv10to12k (read and write)
tx_dma_weight (read and write)
rx_dma_weight (read and write)
infinite_burst (read and write)
disable_64bit (read and write)
accept_jumbo (read and write)
laggr_multistream (read and write)

Regards,

Frank

 

[dandan123]

It's not Solaris 10 it's because you have the CE interface.

For ce and bge interfaces use -

kstat ce
kstat bge