I have some old software that communicates over Serial Port or through a modem. Is there anything I can do to route the data being sent to the com port to a specific IP address on our intranet, and then have that comp route that data to its com port? Any software out there?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Software to Route Serial data over LAN?
- Thread starter Boozer
- Start date
Check with a company called Subnet Solutions in Calgary. I saw a demo of a product in their 'Substation Suite' that as I recall did this on pc's running Windows (32 bit). Here's a link to their web site:
Good luck!
Dave
Good luck!
Dave
jimbopalmer
Programmer
the cheapest hardware solution I know of is about $230
I tried to remain child-like, all I acheived was childish.
I tried to remain child-like, all I acheived was childish.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question