Panther007
MIS
I was wondering if someone could tell me the commands for doing a software loopback to csu/dsu and the smartjack on a router, more specifically on a 1720....
pre-thanks
pre-thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Software Loop Back on 1720
- Thread starter Panther007
- Start date
- Status
- Thread starter
- #3
Panther007
MIS
thanks.
I assume this command would allow me to loop back to the csu/dsu. Do i use the same command with different parameters to loop back to the smartjack.
I assume this command would allow me to loop back to the csu/dsu. Do i use the same command with different parameters to loop back to the smartjack.
Smartjack or the NIU if theres a loopback on the circuit you should see it anywhere on the span. Call your Advance Network Service ( ANS ) who provides the circuit, if its a PPP then have someone on the other side. Your local Telephone company can do an intrusive test and loopup the csu/dsu on both sides. Jeter@LasVegas.com
J.Fisher CCNA
J.Fisher CCNA
- Status