Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Softphone on mobiles with IPO

Status
Not open for further replies.

nym313

Technical User
Jan 23, 2007
38
0
0
HU
Hi
My question would be fairly simple =)
Is there a softphone application (like the one-x mobile edition) that works with IP office and not just Communication Manager?


Thanks
 
Not currently, Roadmap states v4.2 release but we'll see what happens.
 
sorry to hear that :-(
Thanks for the info.
 
Yes there is a Softphone that works with IP Office and you need a Lic for Phone Manger Pro and you need to have a VCM Module in the system for it to work.
 
Im sorry, I wrote it in the topic, but not in the message:
The softphone would be for mobile phones.
 
Since the IPO allows Avaya Hardphones to work on it, would the Windows Mobile Softphone work? I haven't tested, but think I might... :)

Worst case, the 3rd party h323 license could probably be used.

Kris G.
 
Any H.323 softphone should work using the 3rd party IP endpoint license.
 
I have found a nice little H323 and SIP freeware that works great.

SJPhone.

You need ThirdParty licenses.
 
SoftPhones on mobiles or PDAs have no Qos facilities, this may be a potential problem in busy networks.
I would not advise to sell such a solution.

I had SJPhone on my PDA on a 11Mb wireless network ( IP Office SOE ), it worked but quality was poor and unreliable.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top