Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SOE - VM Embedded

Status
Not open for further replies.

VanZenden

MIS
Sep 1, 2003
345
SI
When somebody calls inbound, it plays announcment (hi, you called ... ) and after that it goes directly to operator, without pressing any key.

I know this can be done with VM PRO, but I need to know if it's possible on VM Embedded....

TIA

 
No, there is no time out option

Soopa Doopa Intergalactic IP Office installation mechanic and configuration corruptor from way back.
 
You can try to use the huntgroup first anouncment look how long you are in Que.
Then program a overflow to a other huntgroup.
With a little playing with the overflow grouplist,i think you can do it.

Greets Peter
 
this feature will be avaliable in march on version 3. we are using it on a trial site works well
 
Thanks guys for your input ...

I've read in Embedd. VM Instalation for V3.0, that it will support Maximum Inactivity, before transfering to fallback extension, but these value won't be lower than 5 seconds. I need 0 to 1 second ;)


I'll try what big70 recommended...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top