msgsyscoord
MIS
Does someone with a similar setup as this below have suggestions for my problem?
I'm trying to construct a "thin" pc by installing MS-DOS 6.22 on a large enough partition to also install the 32-bit Client ICA client. First, I installed DOS. Then, I installed 3com NIC drivers for my 3c90X NIC. Then, I installed the TCP/IP stack MS LANMAN 2.2 provided at ftp://ftp.microsoft.com/BusSys/Clients/LANMAN/.
Also, because I'm lazy, I installed mouse drivers. I selected TCP-VSL as the protocol to use for the ICA client.
I setup LANMAN but now I receive the following message when Windows Socketsloads: "Sockets0116: TCP access failure by sockets (not loaded)"
Any help would be greatly appreciated.
I'm trying to construct a "thin" pc by installing MS-DOS 6.22 on a large enough partition to also install the 32-bit Client ICA client. First, I installed DOS. Then, I installed 3com NIC drivers for my 3c90X NIC. Then, I installed the TCP/IP stack MS LANMAN 2.2 provided at ftp://ftp.microsoft.com/BusSys/Clients/LANMAN/.
Also, because I'm lazy, I installed mouse drivers. I selected TCP-VSL as the protocol to use for the ICA client.
I setup LANMAN but now I receive the following message when Windows Socketsloads: "Sockets0116: TCP access failure by sockets (not loaded)"
Any help would be greatly appreciated.