so8 upgrade r7

[tidypants]

Hi all,

Has anyone experienced any problem with upgrading an so8 module to release 7 from 6.1?

 

[hairlessupportmonkey]

SO modules are not supported any more.

the preferred method is BRI trunks with SO Bus adaptors.

ACSS - SME
General Geek

 

[tlpeter]

It is still supported although you cannot buy them anymore.


BAZINGA!

I'm not insane, my mother had me tested!

 

[hairlessupportmonkey]

Im sure our SO module stopped.... perhaps that was an alchemy one - all i remember is, it didnt work on rel 7

ACSS - SME
General Geek

 

[tlpeter]

The 7.0Q2 matrix shows it as supported.
Perhaps it doesn't but i did not search very well.
And to be honest i would not be surprised if it is not supported anymore bu they forgot to mention it in the tech bully


BAZINGA!

I'm not insane, my mother had me tested!

 

[tidypants]

The Matrix states that it is supported however im finding that hard to believe now! Thanks for your input.

 

[DanACS]

The one we use for remote dialup to IPOs still works fine on V7

ACSS - SME
APSS - SME
APDS - Unified Communications
ACS - IP Telephony
ACA - IP Telephony

 

[IPGuru]

There is a Bin file for it so it should be ok
how exactly is your upgrade failing?


Mundus vult decipi decipiatur ergo.

 

[tidypants]

It is not syncing with the IPO, flashing Green lights!

The upgrade went through fine but the module never came back in play.

 

[IPGuru]

I have seen flashing lights on an SO module before & it turned out to be a red herring, the box was still working.
what happens when you connect an ISDN device to one of the ports?


Mundus vult decipi decipiatur ergo.

 

[tidypants]

Nothing, i use it for ISDN dial in..... It does not even register on SSA! Bizarre................

 

[hairlessupportmonkey]

is this another public facing IPO? ;-)

Perhaps we could all log on and check?

ACSS - SME
General Geek

 

[tidypants]

hahaha........unfortunately not, especially after getting Scrutinised last time!!!

 

[IPGuru]

as an alternative why not use the IPO as a router & configure services to connect to the remote systems?
(I do here & no HSM you cant get at MY IPO from the outside world)

Mundus vult decipi decipiatur ergo.