So I have a number off my CS 1000 f

[EddieDuece]

So I have a number off my CS 1000 forwarding to a central office number. It is a phantom 500, DCFW to the CO number. Can I have that forward to the CO number, but have it land in a mailbox off my system on a no answer/busy? This is what it is built like;

DES WEEDS
TN 100 0 10 03 PHANTOM
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN 5576 31 MARP
CPND
NAME RS_Noxious Weed_Rdirect
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 3353 <------Voicemail Pilot Number
TGAR 7
LDN NO
NCOS 2
SGRP 0
RNPG 0
XLST
SCI 0
SCPW 1234
CLS UNR DTN FBD XFD WTA THFD FNA HTD ONS
LPR XRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFA MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXA ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR MCDD T87D PKCH MPTD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 8
FTR DCFW 8 95860366 <-----------CO number



Thanks in advance!

 

[GHTROUT]

If you request the CO to Forward No Answer, then yes. Once it leaves your PBX, it is up to the phone company. I've done what you are asking and it works.

Find more at GHTROUT.com

 

[EddieDuece]

So the CO would FNA to what? My 5576 is a DID forwarding to a flat business line. Are you saying that the business line needs teh FNA to land in my call pilot?

 

[trvlr1]

Give them another DID to forward to, then set that DID up as an ACD for example in your PBX, that forwards to your voice mail, then set up mailbox as needed.