Help,... i can't monitor an interface router 12406 with a NMS software beacuse an oid from mib is missing ifOutDiscards. OID, 1.3.6.1.2.1.2.2.1.19. how can i fix this. I can copy another oid from another interface or from another router same as this, i can edit a mib to put this oid there? And why this oid disappear from mib anyone have an ideea?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
snmpwalk -c ip 1.3.6.1.2.1.2.2.1 interface problem...
- Thread starter vjfl0rin
- Start date
bnorton916
Programmer
What do you mean the OID is missing from the MIB?
If you do a walk on the router do you see the object?
How did the oid disappear from a MIB?
Bill
If you do a walk on the router do you see the object?
How did the oid disappear from a MIB?
Bill
- Thread starter
- #3
Hello.
When I walk on the router 12406 cisco I observe that the variable ifOutDiscards is missing and there are only 17 variables not 18.
This means that I cannot interrogate/monitor the interface with the missing variable ifOutDiscards in a NMS program like CA eHealth.
If I walk on another interface on the router 12406 cisco this variable ifOutDiscards is present.
Why I don't have this variable?
When I walk on the router 12406 cisco I observe that the variable ifOutDiscards is missing and there are only 17 variables not 18.
This means that I cannot interrogate/monitor the interface with the missing variable ifOutDiscards in a NMS program like CA eHealth.
If I walk on another interface on the router 12406 cisco this variable ifOutDiscards is present.
Why I don't have this variable?
bnorton916
Programmer
Can you post the output from both?
Bill
Bill
- Status
Similar threads
- Locked
- Question
- Locked
- Question