SNMPv3 *PP8600* Need suggestions,

[xyCruiseryx]

Hi, I tried to configure snmpv1 one time but with few success,


I need a step by step description how i can configure this easy.

The nortelpapers are not clear for me.

can anybody help me with owen experience ????

 

[JeroeNortel]

Hi there,

Because of 2 noted snmp versions (v1 in the thread and v3 in the titlebox), can you clear out which version you wanna use?
I suppose you mean v3 cause this is far more configuration compared to v1 or v2.

Please update!

 

[xyCruiseryx]

ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhaaaaaa i mean snmpv3 not snmv1......


I need a little suggestion...THX

 

[wanyph]

hi,

try this




config snmp-v3 community info

Index1 - Index6 are your converted rwa, rw, l3, l2, l1, ro community
strings. first and second are default public/private community
strings.

If all you want is two community strings for read-only and read-write
SNMP v1/v2c access, and you don't care about the six access levels:

config snmp-v3 community info
config snmp-v3 community delete Index1
config snmp-v3 community delete Index2
config snmp-v3 community delete Index3
config snmp-v3 community delete Index4
config snmp-v3 community delete Index5
config snmp-v3 community delete Index6
config snmp-v3 community commname first new-commname readonlystring
config snmp-v3 community commname second new-commname readwritestring
config snmp-v3 community info
save config


mewi

 

[JeroeNortel]

ok,

Since you have already opened an identical thread, I suggest you close this one.
It holds the given solutions centralised, keeping the overview of your question.

Regards

 

[xyCruiseryx]

Hi JeroeNortel,
i have not opening the old thread again. the user repaRU was it with a question.


My last posting was from 4.april....it is more a accident.

i closed the old call...