snmpd.log and dpid2.log grows

[steenb]

Hi
I want to run snmpd and dpid2d ( translate dpi and smux ?)
Then logfiles grows with these errormessages :
snmpd.log
>>
6/13/01 15:19:06 NOTICE: SMUX relation started with (127.0.0.1+35876+34092)
06/13/01 15:19:06 NOTICE: SMUX packet from (127.0.0.1+35876+34092)
06/13/01 15:19:06 EXCEPTIONS: simpleOpen rejected (invalid host/network address): localAgent.0 (SMUX 127.0.0.1+35876+34092)
06/13/01 15:19:11 NOTICE: SMUX relation started with (127.0.0.1+35877+34093)
06/13/01 15:19:11 NOTICE: SMUX packet from (127.0.0.1+35877+34093)
06/13/01 15:19:11 EXCEPTIONS: simpleOpen rejected (invalid host/network address): localAgent.0 (SMUX 127.0.0.1+3
<<
dpid2.log
>>
6/13 15:19:41 dpid2 21156 (root ) DEBUG
6/13 15:19:46 dpid2 21156 (root ) smux_wait: warning [ps2pe: Error 0]
6/13 15:19:46 dpid2 21156 (root ) DEBUG
6/13 15:19:51 dpid2 21156 (root ) smux_wait: warning [ps2pe: Error 0]
<<
my snmpd.conf looks like this :
>>
...
smux 0.0 &quot;&quot; 89.0.50.77 # added because Intelligent agent for Oracle databases.
smux 1.3.6.1.4.1.2.3.1.2.1.2 gated_password # gated
smux 1.3.6.1.4.1.2.3.1.2.2.1.1.2 dpid_password #dpid
...
<<
snmpd.peers
>>
&quot;gated&quot; 1.3.6.1.4.1.2.3.1.2.1.2 &quot;gated_password&quot;
&quot;dpid2&quot; 1.3.6.1.4.1.2.3.1.2.2.1.1.2 &quot;dpid_password&quot;
<<
Which looks allright.
If I stop dpid2 the errors stop, so is dpid2 &quot;necessary&quot; ?
Thoe Oracle IA seems to do ok without dpid2, since when I stop IA this is generated in snmpd.log
>>
06/13/01 15:31:45 NOTICE: SMUX packet from (89.0.50.77+35967+34160)
06/13/01 15:31:45 NOTICE: SMUX close: goingDown (89.0.50.77+35967+34160)
06/13/01 15:31:45 NOTICE: SMUX packet from (89.0.50.77+35966+34159)
06/13/01 15:31:45 NOTICE: SMUX close: goingDown (89.0.50.77+35966+34159)
#
<<
and when I start IA again a get a lot of these lines in snmpd.log:
>>
06/13/01 15:33:51 NOTICE: SMUX packet from (89.0.50.77+35999+34163)
06/13/01 15:33:51 NOTICE: SMUX register: readWrite 1.3.6.1.4.1.111.12.1.1.1 in = -1 out = 0 (89.0.50.77+35999+3
4163)
<<
On the other hand
If I remove the
>>
smux 0.0 &quot;&quot; 89.0.50.77 # added because Intelligent agent for Oracle databases.
<<
from snmpd.conf I can run snmpd and dpid2 without generating any significant lock, but Oracle IA wont startup ...
so, should I bother ? any very good faq's on this subject ?
I have tried looking a little bit at redbooks, but hoping that somebody knows these things
Thx in advance & regards
SteenB