bigdaddytim
ISP
How do I set up my Cisco 1605's and my 3640 so that monitoring software can detect SNMP settings. And are they public/private R/W etc. What do I need to do?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SNMP
- Thread starter bigdaddytim
- Start date
- Status
Hi, first you will have log on to the router the enter 'enable' mode then 'conf t' and type the following:
snmp-server community public RO
snmp-server community private RW
Where public and private are the Read-Only and Read-Write community strings, although you should choose your own SNMP community strings as there is little or no security using default values.
Bob
snmp-server community public RO
snmp-server community private RW
Where public and private are the Read-Only and Read-Write community strings, although you should choose your own SNMP community strings as there is little or no security using default values.
Bob
- Status
Similar threads
- Locked
- Question