SNMP traps & default IP

[techmeridian]

Hello, I am setting up SNMP on an 81c on 3.0. I have nearly everything the way that I want it to work with one exception: the traps still carry the default IP from the PBX instead the actual,...showing from 137.135.128.253. I created new hosts for the dual cps. I changed the elnk active and elnk inactive, but still show the default IP in traps. Does it take an INI to activate that change? Thank you for any assistance you may have.

 

[johnpoole]

thanks

john poole
bellsouth business
columbia,sc

 

[techmeridian]

Since no one here jumped in, I came in this morning and INIed. SNMP is working beautifully now, sending appropriate traps, resolving, etc. Nortel book does not indicate an INI is required, but it was in my case. I'm thinking about giving myself a star on this.

 

[I2007]

Did you try to execute "UPDATE DBS" befoure you INI'ed the switch? It rebuilds the inetd which I believe is the engine running the config.

i2007

 

[techmeridian]

I did update dbs prior to INI. Bounced elnk in 137 too. Just needed the INI in this case. I think that I'm going to have to INI a 61c I manage remotely also. I will return to post if anything about the above does not hold true on the next 6 or so that I setup SNMP on.