Hi,
I can try monitoring EAPS on ExtremeNetworks BlackDiamond 6808 but the MIB "EXTREME-EAPS-MIB" is absent.
can you help me ?
SysName: RT-B1
SysLocation: DEDIEE-B1
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:01:30:0A:26:00
Platform: BD6808
License: Full L3 + Security
System Mode: 802.1Q EtherType is 8100 (Hex).
Diag Mode: Fast Post
RED Probability: 0
DLCS: Disabled
Backplane Ls: port-based
SysHealth Check: Enabled. Alarm Level = Log
Recovery Mode: None
Transceiver Diag: Enabled. Failure action: log only
Fdb-Scan Diag: Enabled. Failure action: log only
MSM Failover: take-links-down
System Watchdog: Enabled
Reboot Loop Prot: Disabled
Alter Queue Mgmt: Disabled Next Boot: Disabled
Bus-stats: Enabled
Current Time: Wed Aug 13 21:57:17 2008
Timezone: [Auto DST Enabled] GMT Offset: 60 minutes, name is CET.
DST of 60 minutes is currently in effect, name is not set.
DST begins every first Sunday April at 2:00
DST ends every last Sunday October at 2:00
Boot Time: Fri Dec 28 10:28:54 2007
Config Modified: Unmodified
Next Reboot: None scheduled
MSM-A RebootTime: None scheduled
Timed Upload: Upload configuration (rt-b1) to 10.130.42.0 at 10:00 every day
Timed Download: None scheduled
Temperature: Normal. All fans are operational.
Power Supply: PSU-A OK @ AC220V, PSU-B powered off
MSM: MSM-A MSM-B
------------ ------------
Module Type: MSM-3 MSM-3
Current State: SLAVE MASTER
Default Cfg Mode: Standard
Image Selected: Primary Primary
Image Booted: Primary
Config Selected: Primary Primary
Config Booted: Primary
EW Versions:
MSM-A
------------
Primary EW Ver: 7.3.1.3 [ssh] [wlan]
Secondary EW Ver: 7.3.1.3 [ssh] [wlan]
MSM-B
------------
Primary EW Ver: 7.3.1.3 [ssh] [wlan]
Secondary EW Ver: 7.3.1.3 [ssh] [wlan]
Primary Config: Created by EW Version:
7.3.1.3 [30]
17244 bytes saved on Thu Aug 7 13:48:25 2008
Secondary Config: Created by EW Version:
7.3.1.3 [30]
17076 bytes saved on Thu Sep 29 16:12:07 2005
I can try monitoring EAPS on ExtremeNetworks BlackDiamond 6808 but the MIB "EXTREME-EAPS-MIB" is absent.
can you help me ?
SysName: RT-B1
SysLocation: DEDIEE-B1
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:01:30:0A:26:00
Platform: BD6808
License: Full L3 + Security
System Mode: 802.1Q EtherType is 8100 (Hex).
Diag Mode: Fast Post
RED Probability: 0
DLCS: Disabled
Backplane Ls: port-based
SysHealth Check: Enabled. Alarm Level = Log
Recovery Mode: None
Transceiver Diag: Enabled. Failure action: log only
Fdb-Scan Diag: Enabled. Failure action: log only
MSM Failover: take-links-down
System Watchdog: Enabled
Reboot Loop Prot: Disabled
Alter Queue Mgmt: Disabled Next Boot: Disabled
Bus-stats: Enabled
Current Time: Wed Aug 13 21:57:17 2008
Timezone: [Auto DST Enabled] GMT Offset: 60 minutes, name is CET.
DST of 60 minutes is currently in effect, name is not set.
DST begins every first Sunday April at 2:00
DST ends every last Sunday October at 2:00
Boot Time: Fri Dec 28 10:28:54 2007
Config Modified: Unmodified
Next Reboot: None scheduled
MSM-A RebootTime: None scheduled
Timed Upload: Upload configuration (rt-b1) to 10.130.42.0 at 10:00 every day
Timed Download: None scheduled
Temperature: Normal. All fans are operational.
Power Supply: PSU-A OK @ AC220V, PSU-B powered off
MSM: MSM-A MSM-B
------------ ------------
Module Type: MSM-3 MSM-3
Current State: SLAVE MASTER
Default Cfg Mode: Standard
Image Selected: Primary Primary
Image Booted: Primary
Config Selected: Primary Primary
Config Booted: Primary
EW Versions:
MSM-A
------------
Primary EW Ver: 7.3.1.3 [ssh] [wlan]
Secondary EW Ver: 7.3.1.3 [ssh] [wlan]
MSM-B
------------
Primary EW Ver: 7.3.1.3 [ssh] [wlan]
Secondary EW Ver: 7.3.1.3 [ssh] [wlan]
Primary Config: Created by EW Version:
7.3.1.3 [30]
17244 bytes saved on Thu Aug 7 13:48:25 2008
Secondary Config: Created by EW Version:
7.3.1.3 [30]
17076 bytes saved on Thu Sep 29 16:12:07 2005