Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SNMP IP MANAGER

Status
Not open for further replies.

networkhunt

Technical User
Jun 30, 2011
3
IN
Hi All,

i am new to nortel. i have live nortel 5510 and 8600 in my scnerio.
i have manage all these switches with IP MANAGER so that only specific IP will able to access it via ssh.

i also want to manage all 5510 and 8600 so that only specific IP will access these switches via SNMP. i need a help on configuration part so that only specific source ip will access 5510 and 8600 through SNMP
 
Here is an example of how to set this up.

ipmgr source-ip 1 192.168.45.0 mask 255.255.255.0
ipmgr source-ip 2 192.168.65.0 mask 255.255.255.0
ipmgr source-ip 3 192.168.91.104 mask 255.255.255.255
ipmgr source-ip 4 192.168.91.105 mask 255.255.255.255

This example allows any IP in the .45 or .65 to manage a switch. It also allows only .104 and .105 from the .91 network to manage a switch. I believe this will work for SNMP access, but I am not 100% certain. Post if this doesn't work and I will see what I can find out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top