SNMP if_down traps, but not configured

[AidanEnos]

Yesterday I configured the SNMP traps below on several of my switches, I didn't enable port level traps because I jsut don't care that some reboots their PC. I've started getting if_down traps now and am not sure which snmp trap "family" would be responsible for sending these traps to me. Any help is appreciated.

RMON: Disabled
Extended RMON: Extended RMON module is not present
Extended RMON Netflow: Disabled
Extended RMON Vlanmode: Disabled
Extended RMON Vlanagent: Disabled
Traps Enabled:
Module,Chassis,Bridge,Repeater,Vtp,Auth,ippermit,Vmps,config,entity,stpx,syslog
Port Traps Enabled: None

Community-Access Community-String

AidanEnos

 

[wybnormal]

Are you sure the MIB is if_down? I can not find this MIB in the cisco docs.

While I do not know this SNMP trap, this document may point you to the proper place.

http://www.cisco.com/warp/public/cc/pd/wr2k/tech/cnm_rg.htm

It's a long doc but it covers alot regarding SNMP and RMON for monitoring and measuring.

Mike S
"Diplomacy; the art of saying 'nice doggie' till you can find a rock" Wynn Catlin