I was at AIX 5.2 and I have migrated to AIX 5.3.
When on AIX 5.2, we were with SNMP v1.
Can you help me on how to migrate from snmpd.conf to snmpdv3.conf?
I use these instructions but it doesn't work:
Maybe something I don't understand...
I will show you the snmpd.conf that I have to migrate.
Can you show me how it have to look in snmpdv3.conf?
--------------------------------------------------------------------------------
community abcdef
community private 127.0.0.1 255.255.255.255 readWrite
community system 127.0.0.1 255.255.255.255 readWrite 1.17.2
community public
view 1.17.2 system enterprises view
trap abcdef 127.0.0.1 1.2.3 fe # loopback
trap abcdef server1 # NetView for AIX
smux 1.3.6.1.4.1.2.3.1.2.1.2 gated_password # gated
smux 1.3.6.1.4.1.2.6.4.1 nv6000 # NetView: trapgend
smux 1.3.6.1.4.1.2.3.1.2.2.1.1.2 dpid_password # dpid
smux 1.3.6.1.4.1.2.6.30 "directTalk6000" # Added by DTsnmpd.cfg
----
Thanks a lot.
When on AIX 5.2, we were with SNMP v1.
Can you help me on how to migrate from snmpd.conf to snmpdv3.conf?
I use these instructions but it doesn't work:
Maybe something I don't understand...
I will show you the snmpd.conf that I have to migrate.
Can you show me how it have to look in snmpdv3.conf?
--------------------------------------------------------------------------------
community abcdef
community private 127.0.0.1 255.255.255.255 readWrite
community system 127.0.0.1 255.255.255.255 readWrite 1.17.2
community public
view 1.17.2 system enterprises view
trap abcdef 127.0.0.1 1.2.3 fe # loopback
trap abcdef server1 # NetView for AIX
smux 1.3.6.1.4.1.2.3.1.2.1.2 gated_password # gated
smux 1.3.6.1.4.1.2.6.4.1 nv6000 # NetView: trapgend
smux 1.3.6.1.4.1.2.3.1.2.2.1.1.2 dpid_password # dpid
smux 1.3.6.1.4.1.2.6.30 "directTalk6000" # Added by DTsnmpd.cfg
----
Thanks a lot.