sniffer capture on too many retansmissions 1

[bertowig57]

trying to trouble shoot appliaction user slow response issue, where there is one Virtual IP and 4 web servers running slb, servers connection on the cisco 6500 are set to 100 full duplex. The servers are set up for auto, could this be a problem. Don't see any duplex mis match errors on switch log

 

[franklin97355]

Autonegotiation can always be a problem. It's best if your network is set manually to the same settings if you don't have mixed protocols.

 

[bertowig57]

Thanks for the info. Is there any other words of wisdom besides this, after we hard code it on the server side.

 

[vipergg]

You cannot have the Cisco side hardcoded to 100/full and the servers set as auto , this is a speed/duplex mismatch and will slow things down a lot . This will cause errors on one side or the other . Set both either as auto/auto or hardcode both sides to 100/full .