Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SMS Status DOWN on Avaya SES Server

Status
Not open for further replies.

afahmy2016

Technical User
Mar 15, 2016
8
NL
Hello All ,

my customer have SIP devices that register to standalone SES server version 5.2 integrated with CM4.0 , these SIP devices output are analog phones .

Issue is that phone calls from analog phones ( connected to SIP devices ) to any other phone ( EX: IP phone ) is not working properly ! sometimes i have no dial tone , sometimes i can dial but get fast busy tone , sometimes no ring at all .

Administration Done on CM side
----------------------
- Created SIP trunk / SIP signaling group with CLAN as near end SES server as far end , using TLS with port 5061.
- Created administrator account profile 18.
- Added the CLAN in ip-services and made it allow SAT access , port 5023

Administration Done on SES side
----------------------
- Administered the CM interface with CLAN .
- used the created account on CM and choose telnet over 5023.

when i am doing test link on SES i got the SMS status is DOWN due to time out to reach localhost.
And on the SES Alarms there is the EventID 68 minor error repeated (avCCSPPMResourceError: Authentication Failure )

I tried to access the CM with the created account i used in SES and i was able to login to SAT normally !!

Any idea behind this alarm and SMS DOWN status and how i can bring it up ? i want to fix that to isolate the issue from being in my devices before checking the third party SIP devices.

Also below a trace captured on SES between IP Phone ( 30003) and analog phone attached to SIP device ( 54326 ) and i got fast busy tone !

----------
Mar 13 23:02:46 2016 matching filter label <30003 to 54326>: elgouna.elgouna.com: [Send Request ]
{connection: host=192.168.3.72 port=5060 protocol=UDP}
INVITE sip:54326@192.168.3.72:5060;transport=udp SIP/2.0
Call-ID: 8066502182f0e51ea4f56cb1b8800
CSeq: 1 INVITE
From: "Telecom Network Dep." <sip:30003@elgouna.com:5061>;tag=8066502182f0e51e94f56cb1b8800
Record-Route: <sip:192.168.1.35:5060;lr>,<sip:192.168.1.33:5061;lr;transport=tls>
To: "54326" <sip:54326@elgouna.com>
Via: SIP/2.0/UDP 192.168.1.35:5060;branch=z9hG4bK83838303030363636331a343b.0,SIP/2.0/TLS 192.168.1.33;psrrposn=2;received=192.168.1.33;branch=z9hG4bK8066502182f0e51eb4f56cb1b8800
Content-Length: 271
Content-Type: application/sdp
Contact: "Telecom Network Dep." <sip:30003@192.168.1.33:5061;transport=tls>
Max-Forwards: 70
User-Agent: Avaya CM/R014x.00.5.742.0
Allow: INVITE,CANCEL,BYE,ACK,PRACK,SUBSCRIBE,NOTIFY,REFER,OPTIONS
Accept-Contact: *;+avaya-cm-line=1
Supported: 100rel,timer,replaces,join,histinfo
Alert-Info: <cid:internal@elgouna.com>;avaya-cm-alert-type=internal
Min-SE: 1200
Session-Expires: 1200;refresher=uac
P-Asserted-Identity: "Telecom Network Dep." <sip:30003@elgouna.com:5061>
History-Info: <sip:54326@elgouna.com>;index=1,"54326" <sip:54326@elgouna.com>;index=1.1

v=0
o=- 1 1 IN IP4 192.168.1.33
s=-
c=IN IP4 192.168.1.29
t=0 0
m=audio 27196 RTP/AVP 0 18 4 8 127
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:4 G723/8000
a=fmtp:4 annexa=no
a=rtpmap:8 PCMA/8000
a=rtpmap:127 telephone-event/8000

-----------
Appreciate any support on that .

afahmy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top