I have made a ticker tape affect for a flash movie. View it at You may notice that it is not totally smooth even though each ticker tape (they are seperate movies) is made of 1200 frames at 25fps. I belive that this is not neccessary, but is the smoothest I can do.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Smooth Ticker Tape Using JPGs 1
- Thread starter mattys
- Start date
-
1
- #2
hi mattys
There's no need for your ticker-tape to be 1200 frames long from what I can see, at most I would say you need 3 frames wih some nice scripting. If you post a link to your fla or e-mail me the relevant ticker-tape graphics I'll re-jig it for optimisation.
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
There's no need for your ticker-tape to be 1200 frames long from what I can see, at most I would say you need 3 frames wih some nice scripting. If you post a link to your fla or e-mail me the relevant ticker-tape graphics I'll re-jig it for optimisation.
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
OK
(18K)
This is just a variation of the good old Gallery fla, but without the user interaction.
If you ever want to add anything to the ticker, just open the library and double-click GALLERY. There's an invisible graphic in there in order that a blank space appears between scrolls, remove that if you want and see the result.
If it's scrolling too slow/fast, just double-click the mc "a" in the library and change the value of variable "f".
Hope this helps a little.
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
(18K)
This is just a variation of the good old Gallery fla, but without the user interaction.
If you ever want to add anything to the ticker, just open the library and double-click GALLERY. There's an invisible graphic in there in order that a blank space appears between scrolls, remove that if you want and see the result.
If it's scrolling too slow/fast, just double-click the mc "a" in the library and change the value of variable "f".
Hope this helps a little.
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
Sorry about that, problem with reversing the script (slight oversight on my part), fixed now:
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
just received your e-mail, here's the F4 version:
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
dave davdesign@pinkzeppelin.com
^^^^^^^^^^^^^^^^^^^^^
- Status
Similar threads
