Apr 7, 2014 #1 SoGaIPO Vendor Feb 9, 2012 110 US Is it possible to dump SMDR to a hyper terminal session open on the VMPro pc? And if so, what tcp port should I use?
Is it possible to dump SMDR to a hyper terminal session open on the VMPro pc? And if so, what tcp port should I use?
Apr 7, 2014 Thread starter #2 SoGaIPO Vendor Feb 9, 2012 110 US Got it. Do wish caller id would pass, though. Any ideas, anyone? Upvote 0 Downvote
Apr 8, 2014 #3 hairlessupportmonkey IS-IT--Management Aug 26, 2009 8,233 NZ What are you trying to achieve? ACSS - SME General Geek Upvote 0 Downvote
Apr 8, 2014 #4 IPGuru Vendor Jun 24, 2003 8,391 GB caller ID does pass through to the SMDR, if you are not seeing it then your system is not receiving it. A Maintenance contract is essential, not a Luxury. Do things on the cheap & it will cost you dear Upvote 0 Downvote
caller ID does pass through to the SMDR, if you are not seeing it then your system is not receiving it. A Maintenance contract is essential, not a Luxury. Do things on the cheap & it will cost you dear
Apr 8, 2014 #5 Westi Programmer May 14, 2007 10,556 Ontario http://www.tek-tips.com/faqs.cfm?fid=7689there is a free logging tool in the FAQ section if you need one Joe W. FHandw, ACSS (SME), ACIS (SME) “This is the end of the world, make sure to buy your T-shirt before it is too late" Original expression of my daughter Upvote 0 Downvote
http://www.tek-tips.com/faqs.cfm?fid=7689there is a free logging tool in the FAQ section if you need one Joe W. FHandw, ACSS (SME), ACIS (SME) “This is the end of the world, make sure to buy your T-shirt before it is too late" Original expression of my daughter