Dear Solaris expert
I had added more hard disk (SCSI)into my server running Solaris 9. when i start "SMC" tool i unable to locate the new hard disk. But when i run "format" command it show the new installed disk status. Below is the step i ahd perform to initialize the new disk
#drvconfig
#disk
#format
I also perform "boot -r" to try to detect the SCSI devices. But from "SMC" still unable to detect the new disk. Please advise thank you..
Sincere
Sam
I had added more hard disk (SCSI)into my server running Solaris 9. when i start "SMC" tool i unable to locate the new hard disk. But when i run "format" command it show the new installed disk status. Below is the step i ahd perform to initialize the new disk
#drvconfig
#disk
#format
I also perform "boot -r" to try to detect the SCSI devices. But from "SMC" still unable to detect the new disk. Please advise thank you..
Sincere
Sam