Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Slow Restore using Arserve agent for Netware
- Thread starter sivananda
- Start date
Guest_imported
New member
- Jan 1, 1970
- 0
Try to use IPX between the AS server and the NWagent during this restore phase. Don't forget to type the NWserver IPX address just before to run the job (serverIPXaddress:000000000001).
Another important factor to get the most of your net is to add the CMP_MAX_REQ=32 parametre (you can try another value, as 64, depending the speed and the available bandwidth on your LAN) ine the NWAPFC.INI file, after the NWAGENT.NLM command.
Good luck
Another important factor to get the most of your net is to add the CMP_MAX_REQ=32 parametre (you can try another value, as 64, depending the speed and the available bandwidth on your LAN) ine the NWAPFC.INI file, after the NWAGENT.NLM command.
Good luck
- Status
Similar threads
- Locked
- Question