Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Slow Network Performance

Status
Not open for further replies.

vinniegraves

IS-IT--Management
Dec 6, 2007
19
GB
Hi Guys

we have a few SBS 2011 servers that seem to have slowed down for no reason, a restart seem to fix the problem for a day or so but then we get slow performance again.

Spec of servers are Intel Xeon 5530 2.4 GHz Processors X 2, 8 GB Ram, Raid 0 SCSI Drives with over 100 Gb free space on C Drive. 2 Broadcom BCM5709C NetXtreme GB Network Card (with one disabled), SBS 2011 64 SP1, ESET Mail Security 4.3.

The server was running fine and has suddenly slowed down but without any changes or updates.

The BPA comes back with No errors or recommendations.

Any Help would be greatly appreciated

Many Thanks
Vinnie
 
What AV are you using? Also when performance slow, run up the task manager and have a look at whats happening.

ACSS - SME
General Geek

 
Well, first I'd say that 8gb is just barely enough for an SBS 2011 server. SBS 2011 runs both Exchange 2010 and at least three instances of SQL, so it loves to eat RAM. Normally 12gb would be the minimum for me. If Exchange doesn't have the RAM to use, it uses disk, and since that's multiple times slower, I would imagine that with a decent amount of user access to mail, you'd also start to get sluggish as Exchange has to keep less data cached in memory and resort to disk IO instead. How many mailboxes in use on these servers?

Are you running RAID 0 or RAID 1?

I too would suggest disabling AV when it's slow and seeing if the performance immediately changes. That's the most common cause, particularly when there's a memory shortfall.

Dave Shackelford
ThirdTier.net
TrainSignal.com
 
'If Exchange doesn't have the RAM to use'

Ahem.... store.exe watch how much it gobbles up !!! exchange 2010 (as part of sbs 2011 ) and exchange 2007 (as part of SBS2008) prefers to use memory as opposed to disk......





iMachiavellian - think dissident
 
While Exchange will take as much RAM as it can, that also means that the less RAM you give it to eat, the more disk IO it will generate. Exchange is also configured by default to release RAM to other apps that need it, so just because all your RAM is being eaten by Exchange doesn't mean it's not available for another app to request and use. It just makes sure that no RAM goes to waste unused.

Dave Shackelford
ThirdTier.net
TrainSignal.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top